Don Terrill’s Speed-Talk

Asking for a friend. Anyone here an expert on older Buick stuff. My friend is concerned about a 322, and about the 62* or 66* lifter banks for cam grinding purposes. Best if I pass his # on. He doesn't go online, rather talk than type . Thanks for any help

Thanks Guys, that's everything I could have hoped to get.

Can someone tell me the cam specs for a R2 , 289 Studebaker? Or suggestion for modified specs to the regrindable cam I have here, ex, get a little more lift, maybe a bit more duration? Any help is greatly appreciated. thanks guys

Thanks guys, that gives me something to start with

I need some cam id help please. SBC, stamp on it is CHS 319 328 R10 S7770 looks like a 7 stamped over the 0 BC small numbers are 222000. I googled the hell out of it, no luck. Anybody know what it is. Thanks guys

I have some SB2.2 pistons with a 17 cc dish, 4.125 bore, 1.123 c.d. , .927 pin bore, .043 top,1.5 second.3mm low tension rings to go with them if that is of any interest to you. JE mfg/\.

I have a solid roller cam for a BBC, that I can't find info on. Maybe these numbers can be identified by someone on here.

4175 314 RXH -15
P
C
UL0291-04
These are all I've got on the cam. Thanks for the help guys

Does this intake work on G.M. symmetrical port Bowtie head , pn 10051129? Brodix has no answer. Thanks guys.

Thanks guys. Really appreciate the excellent info

SBF, AFR head with 2.08 Intake & 1.6 exhaust valves, we have .030 clearance between the valves. Is this too small clearance between the valves? Drag race engine, 10.5:1, 408 cu.in. solid roller,max rpm 7000. good quality valves, PAC springs. Thanks guys

Nitro Harley, 4.375 bore. I'm looking for piston to wall clearance info. One set of pistons are hard anodized the other set are std CP/Carillo pistons. Only # on piston is 437. Any help is appreciated. Thanks guys

These tires are a D.O.T rated tire. Looking for new, but will buy used if in very good condition. MT stopped making them. Thanks for looking

PM Sent

Intakes are 2.350 dia, 6.425 long, square groove lock, 5/16 stem
Exhausts are 1.880 dia, 6.625 long, square groove lock, 5/16 stem
They are used in old 10051129 G.M. heads. Thanks Guys

Sunnen CK-10, in good working condition. Good selection of stones, needs block hold downs, & gauge. Quick Way model F boring bar with some tooling.Sunnen LB666 rod hone machine with some tooling. All older equipment, but a good start, for the right price. 9500 takes it all.Open to offers. Cash t...