Search found 1310 matches
- Mon Mar 25, 2024 9:00 am
- Forum: Engine Tech
- Topic: Speedmaster block Quality in 2023
- Replies: 34
- Views: 5309
Re: Speedmaster block Quality in 2023
GM has has some pretty questionable machine work over the years too ... Like to hear more about the alu SBC blocks etc.
- Fri Mar 22, 2024 2:46 pm
- Forum: Engine Tech
- Topic: Jesel or T&D?
- Replies: 26
- Views: 1350
Re: Jesel or T&D?
One other thing worth mentioning is that Jesel's geometry seems to make more sense. I'm not sure how the others set their rocker geometry.
- Fri Mar 22, 2024 11:12 am
- Forum: Engine Tech
- Topic: Jesel or T&D?
- Replies: 26
- Views: 1350
Re: Jesel or T&D?
Steve Morris uses them for his Pro-Mod billet engines...
- Fri Mar 22, 2024 8:41 am
- Forum: Engine Tech
- Topic: Jesel or T&D?
- Replies: 26
- Views: 1350
Re: Jesel or T&D?
Why such a large diameter strong spring?
- Thu Mar 21, 2024 8:28 am
- Forum: Engine Tech
- Topic: Solidft to solid roller
- Replies: 9
- Views: 718
Re: Solidft to solid roller
Suggest listing the engine specs and let the experts here guide you.
- Wed Mar 20, 2024 3:02 pm
- Forum: Engine Tech
- Topic: battery tech
- Replies: 11
- Views: 668
- Wed Mar 20, 2024 2:56 pm
- Forum: Engine Tech
- Topic: battery tech
- Replies: 11
- Views: 668
Re: battery tech
Be interesting to try this one....
- Wed Mar 20, 2024 1:41 pm
- Forum: Engine Tech
- Topic: battery tech
- Replies: 11
- Views: 668
Re: battery tech
Do tell... what are the factors...
- Tue Mar 19, 2024 9:39 am
- Forum: Engine Tech
- Topic: carburettor cleaning
- Replies: 24
- Views: 2019
Re: carburettor cleaning
my harbor freight unit took the anodizing off AN fittings... cycle 3 ... I was like.. .OH CRAP.... An ultrasonic cleaner would not do that with plain water or water with the right cleaning agent. You must have used a strong alkaline, such as Castrol Super Clean, which is not aluminum safe because i...
- Mon Mar 18, 2024 12:59 pm
- Forum: Engine Tech
- Topic: Anyone know what size this is?
- Replies: 12
- Views: 986
Re: Anyone know what size this is?
Don't put the gauge sensor there....
- Mon Mar 18, 2024 10:49 am
- Forum: Engine Tech
- Topic: carburettor cleaning
- Replies: 24
- Views: 2019
Re: carburettor cleaning
my harbor freight unit took the anodizing off AN fittings... cycle 3 ... I was like.. .OH CRAP....
- Thu Mar 14, 2024 6:46 am
- Forum: Engine Tech
- Topic: Crank trigger, damper, and pulley stackup
- Replies: 12
- Views: 536
Re: Crank trigger, damper, and pulley stackup
Aftermarket Dampers are "bolt on" parts that should and normally do come in the right size. Pulleys are the same way. Now I want to add a crank trigger ignition system - simple 4 magnet deal. This would involve a crank wheel that would bolt between damper and pulley. Now belt alignment is...
- Mon Mar 11, 2024 2:35 pm
- Forum: Engine Tech
- Topic: Service life of 6mm stem Ti valves.
- Replies: 9
- Views: 656
- Mon Mar 11, 2024 7:35 am
- Forum: Engine Tech
- Topic: Service life of 6mm stem Ti valves.
- Replies: 9
- Views: 656
Re: Service life of 6mm stem Ti valves.
120 on the seat is pretty mild. Research what motorcycles run. I think some of them use 5mm valves and rpm to 10K.
Hyd roller should be pretty easy on parts.
Hyd roller should be pretty easy on parts.
- Mon Mar 11, 2024 7:30 am
- Forum: Engine Tech
- Topic: Sanity Check On My Build
- Replies: 18
- Views: 1313
Re: Sanity Check On My Build
sell and build what you really want.... otherwise it will plague you forever until you eventually build what you want and spend twice as much.