Search found 1520 matches
- Sun Mar 24, 2024 12:54 pm
- Forum: Engine Tech
- Topic: NASCAR Truck engies on a road course
- Replies: 19
- Views: 1133
Re: NASCAR Truck engies on a road course
Yes i did Warpspeed, I am sure Larson was thinking i appreciate that boys LOL, and then used that HMS Engine to make a gap . Mark H.
- Sat Mar 23, 2024 9:37 am
- Forum: Engine Tech
- Topic: NASCAR Truck engies on a road course
- Replies: 19
- Views: 1133
Re: NASCAR Truck engies on a road course
Thank you sir, but that really is surprising to me. Seems like an IROC in the Craftsman Truck Series ?
- Sat Mar 23, 2024 6:27 am
- Forum: Engine Tech
- Topic: NASCAR Truck engies on a road course
- Replies: 19
- Views: 1133
Re: NASCAR Truck engies on a road course
Warpspeed, are you saying that the Trucks representing Ford and Toyota are LS based Engines ?? The Only reason i ask is because you used the word
" All " . Mark H.
" All " . Mark H.
- Wed Mar 06, 2024 8:38 pm
- Forum: Engine Tech
- Topic: Anyone been able to reach Isky Cams lately?
- Replies: 36
- Views: 2696
Re: Anyone been able to reach Isky Cams lately?
Thoughts and Prayers to Ron's wife and the rest of the Iskenderian family . Ron was a super nice person to call and talk with and was always there for you . Ron seemed to me to be very educated / wise on what ever you presented to him . We were personal friends and i will miss him. RIP Ron . Mark H.
- Fri Feb 23, 2024 9:58 pm
- Forum: Engine Tech
- Topic: Total Seal zero-gaps
- Replies: 16
- Views: 1375
Re: Total Seal zero-gaps
Gapless piston rings have accomplished two things that can not be denied. 1. The claims behind the gapless ring is a story that is " Easy " to latch onto ( believe in ) . 2. It has made more than one Ring producer a whole lotta $$ . Mark H.
- Wed Jan 31, 2024 6:23 am
- Forum: Engine Tech
- Topic: Rod bearing crush too much?
- Replies: 17
- Views: 1234
Re: Rod bearing crush too much?
In what manner did you determine that your clearances are where you want them ? Mark H .
- Tue Jan 23, 2024 5:05 pm
- Forum: Engine Tech
- Topic: Merlin Iron 310 BBc heads
- Replies: 14
- Views: 987
Re: Merlin Iron 310 BBc heads
I do not believe that Intake port will flow near that much and i have messed with a bunch of BBC heads . Mark H.
- Mon Jan 22, 2024 9:08 pm
- Forum: Engine Tech
- Topic: Merlin Iron 310 BBc heads
- Replies: 14
- Views: 987
Re: Merlin Iron 310 BBc heads
Is the valve angle 24 Degrees as stock ? Is the Intake port raised above stock BBC ports ? Are the heads stock as they were Cast ? Mark H.
- Mon Jan 22, 2024 9:02 pm
- Forum: Engine Tech
- Topic: LS Valve weight VS spring pressure
- Replies: 94
- Views: 5352
Re: LS Valve weight VS spring pressure
No great need, just like to be sure the valve stays shut after it was lowered on to the seat. Low spring rate spring gives you the nose pressure required and high side seat pressure. If I over rev and bounce it over the nose and it's hydraulic it pumps up but at least it can help bleed it back down...
- Mon Jan 22, 2024 7:02 am
- Forum: Engine Tech
- Topic: LS Valve weight VS spring pressure
- Replies: 94
- Views: 5352
Re: LS Valve weight VS spring pressure
Hi Walter, Thank You, I will call them Monday morn. How do you feel about those PAC1238X springs in an extreme endurance off road 7-8hr race environment? At ~.620" lift I have been using the Erson/FSP PSI springs with incredible longevity. I'm piecing together a hyd roller 442 cu in LS7 with ....
- Sun Jan 21, 2024 10:31 am
- Forum: Engine Tech
- Topic: Making sense of old flow numbers.
- Replies: 10
- Views: 887
Re: Making sense of old flow numbers.
The reworked numbers are Impossible if the testing was done under the conditions commonly used today . Mark H.
- Sat Jan 06, 2024 9:43 am
- Forum: Engine Tech
- Topic: Sealed Lifter Valley From Crankcase
- Replies: 17
- Views: 88445
Re: Sealed Lifter Valley From Crankcase
Warpspeed, what you stated above is comforting to me, thanks for your input as always, Mark H.
- Thu Jan 04, 2024 1:44 pm
- Forum: Engine Tech
- Topic: Oil pan gasket 434 SBC
- Replies: 23
- Views: 59031
Re: Oil pan gasket 434 SBC
I would like to add a comment to this thread. The very last thing to touch the surfaces that " Any " sealing product is going to bond to should be a Clean / Unused lint free paper towel soaked with Acetone, some popular products such as Brake-Clean "Will" leave a slight residue w...
- Mon Dec 25, 2023 1:09 pm
- Forum: Engine Tech
- Topic: Merry Christmas
- Replies: 9
- Views: 9110
Merry Christmas
Merry Christmas to all of you Engine lovers, and hope you have a safe and healthy 2024 !!
- Sun Dec 10, 2023 1:22 pm
- Forum: Engine Tech
- Topic: ACME thread ques. please see=Shop & Garage
- Replies: 1
- Views: 1482
Re: ACME thread ques. please see=Shop & Garage
The question can be read in Shop and Garage Section . Thanks Mark H.