EBACBDC4-948B-4A81-BE28-C9633925AE06.jpeg
Search found 997 matches
- Tue Apr 23, 2024 5:39 pm
- Forum: Engine Tech
- Topic: World alu block; removing material for lifter tie-bars.
- Replies: 4
- Views: 215
- Tue Apr 23, 2024 5:35 pm
- Forum: Engine Tech
- Topic: World alu block; removing material for lifter tie-bars.
- Replies: 4
- Views: 215
World alu block; removing material for lifter tie-bars.
Yaa. Hi. Got a question... Season starts in 4 weeks. I'm stressed.... New lifters arrived last week. Tested cyl1/2 all good, but when installing the rest to bolt the heads down, I figured the tie-bars hit the transverse "Braces" connecting the two banks. These braces have oil- channels, sh...
- Wed Mar 20, 2024 9:38 am
- Forum: Engine Tech
- Topic: SBF ISKY offset solid lifters; part number!
- Replies: 8
- Views: 9768
Re: SBF ISKY offset solid lifters; part number!
Thank you. I have heard about instances like you describe earlier, but Chevy. Anyway I didn’t order Comp. I felt what they had to offer was a bit down from others. As I understand, their ‘Elite’ - lifters are no longer available? Abandoned Morel and Isky, too, snd went to someone who’s never let me ...
- Wed Mar 13, 2024 7:23 am
- Forum: Engine Tech
- Topic: SBF ISKY offset solid lifters; part number!
- Replies: 8
- Views: 9768
Re: SBF ISKY offset solid lifters; part number!
Hi. I stopped using stud- mounted rockers 10 years ago. Yes, I’m aware of the offset lifter dilemma. However, with 50? 1/4- mile races a year, I do not expect it to cause any trouble, even in an aluminum block.
I already tried centered lifters. Tore my rockers off their bearings…
I already tried centered lifters. Tore my rockers off their bearings…
- Wed Mar 13, 2024 7:17 am
- Forum: Engine Tech
- Topic: Anyone been able to reach Isky Cams lately?
- Replies: 36
- Views: 2696
Re: Anyone been able to reach Isky Cams lately?
Hi. I’ve contaded them by email and on their facebook-page 3 times for about 6 and 3 months ago, without any reply. Asked for help with a part number.
In the end I figure it out, but I still invested my cash in Jesel- parts instead.
In the end I figure it out, but I still invested my cash in Jesel- parts instead.
- Sat Mar 02, 2024 4:47 pm
- Forum: Engine Tech
- Topic: SBF ISKY offset solid lifters; part number!
- Replies: 8
- Views: 9768
Re: SBF ISKY offset solid lifters; part number!
Figured the left/ right- matter. Look at the lifter with link bar away from you. Comp catalogue...
Makes right intaker for Fords, so the "Yates" lifters for SBF should be the correct part for what I'm doing. As far as I understand.
Makes right intaker for Fords, so the "Yates" lifters for SBF should be the correct part for what I'm doing. As far as I understand.
- Sat Mar 02, 2024 12:52 pm
- Forum: Engine Tech
- Topic: SBF ISKY offset solid lifters; part number!
- Replies: 8
- Views: 9768
Re: SBF ISKY offset solid lifters; part number!
HI! I had no luck getting feedback from Isky by mail or on their Facebook- page.... If anyone has any information on my question, I appreciate it... BTW: Might be easier to answer. Speaking of a lifter- what does right or left offset imply? I mean; it all depends if you see the lifters from the cent...
- Wed Jan 03, 2024 4:35 am
- Forum: Engine Tech
- Topic: SBF ISKY offset solid lifters; part number!
- Replies: 8
- Views: 9768
Re: SBF ISKY offset solid lifters; part number!
Thank you. I have written off the BAM lifters as their body dia is less than 0.874". I do not have data on the ISKY lifters, so it's bit of a gamble.....
- Wed Jan 03, 2024 4:31 am
- Forum: Forum Help / Questions / Tips
- Topic: Leaked username/password (s)?
- Replies: 4
- Views: 17229
Re: Leaked username/password (s)?
Thank you; haven't noticed any more bogus activities on phone or elswhere. All good.
- Sat Dec 23, 2023 7:23 am
- Forum: Engine Tech
- Topic: SBF ISKY offset solid lifters; part number!
- Replies: 8
- Views: 9768
SBF ISKY offset solid lifters; part number!
Ho, Ho Ho.... No, Santa don't have anything for me this year, so I'll have to come up with some laternative solutions. Have been waiting since september for a set of Morel lifters, but delivery is not even comfirmed yet. This is for stock lifter bores in a 302 Ford- block. I need the intakes offset ...
- Wed Nov 29, 2023 11:48 am
- Forum: Engine Tech
- Topic: Double headgaskets?
- Replies: 10
- Views: 2015
Re: Double headgaskets?
Thank you all for insights. Yes, 2 gaskets probably not enough, I’d need 3, actually. I think the Cometics ar 0.14’’ So…. either I’ll find someone who can make a shim, or I’ll change rhe pistons. My only options, I suppose. However…. The sandwich principle- two stock gaskets and a Cometic steel inbe...
- Sat Nov 25, 2023 5:21 am
- Forum: Engine Tech
- Topic: Double headgaskets?
- Replies: 10
- Views: 2015
Double headgaskets?
Hello. A solution I never used before, so I just want to know if it's usually OK to use two headgaskets stacked. Some say there will be sealing problems between the gaskets. Regular headgaskets w/ steel fire-rings, composite. Maybe sealant around water ports between gaskets? Background is a shortblo...
- Tue Nov 14, 2023 10:36 am
- Forum: Engine Tech
- Topic: Summit racing budget 350/400 blocks.
- Replies: 35
- Views: 15591
Re: Summit racing budget 350/400 blocks.
Our block castings are dual sourced in the US and a European foundry. Both are OE suppliers to folks like Ford and GM. We bring raw castings and fully machine in house. Norris Marshall, CEO, Blueprint Engines Can I ask why your website for Blueprint engines does not list blocks in the component men...
- Mon Nov 13, 2023 6:14 pm
- Forum: Engine Tech
- Topic: Summit racing budget 350/400 blocks.
- Replies: 35
- Views: 15591
Re: Summit racing budget 350/400 blocks.
Thank you for stopping by, Norris.
There were some rumours of a smallblock Ford 8.2 deck engineblock manufactured by Blueprint, too. Did that ever happen?
There were some rumours of a smallblock Ford 8.2 deck engineblock manufactured by Blueprint, too. Did that ever happen?
- Wed Nov 01, 2023 9:59 am
- Forum: Engine Tech
- Topic: CAT RACING/ Crankshaft Depot Ebay- parts
- Replies: 4
- Views: 673
Re: CAT RACING/ Crankshaft Depot Ebay- parts
What? No- you arr completely mistaken. My current lifters are 0.741’’ and they are no longer made. Current lifters are sub 074. Although they are listed as… 0.75 or 0.74. Very hard to get the bores bored, very fee places to turn. Trust me… And if I do, I’ll move to an ezpensive lifter. Won’t happen ...