Search found 924 matches
- Sat Apr 13, 2024 3:24 pm
- Forum: Engine Tech
- Topic: SuperStock 461X 041X Heads and Dyno tests
- Replies: 78
- Views: 7827
Re: SuperStock 461X 041X Heads and Dyno tests
I suppose your not allowed to use the W shaped or finned intake port floor. Would be a cool way to have fun with the port while complying with the cc rules. You can.. I tried it on my first engine. "I tried it on my first engine." did it gain HP ?? did it lose HP ??? or no difference in H...
- Sat Apr 13, 2024 10:46 am
- Forum: Engine Tech
- Topic: SuperStock 461X 041X Heads and Dyno tests
- Replies: 78
- Views: 7827
- Fri Apr 12, 2024 8:52 pm
- Forum: Engine Tech
- Topic: SuperStock 461X 041X Heads and Dyno tests
- Replies: 78
- Views: 7827
Re: SuperStock 461X 041X Heads and Dyno tests
So Larry I know you will appreciate this. This would be the Edelbrock that would replace the 041. This set is for a 350/300hp combo.
While I appreciate the purest, the aluminum head is bigger in volume to be legal.
While I appreciate the purest, the aluminum head is bigger in volume to be legal.
- Sun Apr 07, 2024 2:06 pm
- Forum: Engine Tech
- Topic: Extending intake dividers
- Replies: 33
- Views: 1863
Re: Extending intake dividers
Yes we tried several.jamie wrote: ↑Sat Apr 06, 2024 9:12 pmChad,did you or were you allowed to use open spacers on this?SpeierRacingHeads wrote: ↑Sat Apr 06, 2024 2:48 pm Here is a 300-25 I done for a 350/360hp Super Stock engine. It hated it! Ended up pulling it and grinding it all back out while it was still on the dyno.
- Sun Apr 07, 2024 2:06 pm
- Forum: Engine Tech
- Topic: Extending intake dividers
- Replies: 33
- Views: 1863
Re: Extending intake dividers
Here is a 300-25 I done for a 350/360hp Super Stock engine. It hated it! Ended up pulling it and grinding it all back out while it was still on the dyno. Chad, was that with a Q-Jet Carb ??? its very hard to beat the Edelbrock Victor-E Manifold with a Q-Jet No this was a LT1 combo with a 780 vac se...
- Sat Apr 06, 2024 2:48 pm
- Forum: Engine Tech
- Topic: Extending intake dividers
- Replies: 33
- Views: 1863
Re: Extending intake dividers
Here is a 300-25 I done for a 350/360hp Super Stock engine. It hated it! Ended up pulling it and grinding it all back out while it was still on the dyno.
- Wed Mar 13, 2024 6:36 pm
- Forum: Engine Tech
- Topic: AMChevy
- Replies: 3
- Views: 815
AMChevy
Had to laugh. Working on a set of Indy AMC heads. The shape totally reminds me of a 23º Chevy.
It's NOT very thick for dang sure. Needs a smaller water jacket under the floor.
It's NOT very thick for dang sure. Needs a smaller water jacket under the floor.
- Sat Mar 09, 2024 12:45 pm
- Forum: Engine Tech
- Topic: Intake Manifold Porting Show ‘n Tell
- Replies: 757
- Views: 812331
Re: Intake Manifold Porting Show ‘n Tell
Yea.. no words needed.
- Fri Mar 01, 2024 5:39 pm
- Forum: Engine Tech
- Topic: Intake Manifold Porting Show ‘n Tell
- Replies: 757
- Views: 812331
Re: Intake Manifold Porting Show ‘n Tell
He just won class as the Baby Gators today!
- Thu Feb 29, 2024 10:36 am
- Forum: Engine Tech
- Topic: Intake Manifold Porting Show ‘n Tell
- Replies: 757
- Views: 812331
Re: Intake Manifold Porting Show ‘n Tell
Customer just texted and I did a Super Stock manifold for him. This manifold. Said it's worth .06! NICE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
MIGHT HAVE PICKED UP ANOTHER .04 SMOOTH! HA!
MIGHT HAVE PICKED UP ANOTHER .04 SMOOTH! HA!
- Fri Feb 23, 2024 10:23 am
- Forum: Engine Tech
- Topic: Total Seal zero-gaps
- Replies: 16
- Views: 1347
Re: Total Seal zero-gaps
I can add that when I ordered my new CP pistons for the Super Stock engine, the first call was to the expert (no names) at Total Seal on what is the best rings to build the piston to. Long story short it's a $220 .7/.7/2mm set of rings.
- Thu Feb 22, 2024 7:33 pm
- Forum: Engine Tech
- Topic: NHRA STOCK valve job
- Replies: 52
- Views: 6165
Re: NHRA STOCK valve job
I got it as low as I could. Still has a 16" cam center. But I have to add weight so I will get it ironed out.
- Thu Feb 22, 2024 10:06 am
- Forum: Engine Tech
- Topic: ProFiler 13º CNC Program
- Replies: 4
- Views: 715
Re: ProFiler 13º CNC Program
I do not...rapidride2 wrote: ↑Thu Feb 22, 2024 12:38 am Any programs available for the PB 1200 Brodix maneater 12 degree heads?
- Wed Feb 21, 2024 11:51 am
- Forum: Engine Tech
- Topic: NHRA STOCK valve job
- Replies: 52
- Views: 6165
Re: NHRA STOCK valve job
Stock eliminator is not an entry level class and it’s not inexpensive. I’ve run every thing from Compitition eliminator to Super stock. I’ve stepping out of a Top dragster to stock and I feel it’s a tougher class and has more honor I would certainly argue that a good super stock engine is more labo...
- Mon Feb 19, 2024 7:17 pm
- Forum: Engine Tech
- Topic: NHRA STOCK valve job
- Replies: 52
- Views: 6165
Re: NHRA STOCK valve job
A stocker valve job does not seal on the 45 seat! :wink: Not all heads have O.E.M. seat angle of 45 degrees ... though, that seat angle rule does not seem to be enforced these days; I think the newest rules, as written, may even have that part deleted. OK, so I will rephrase it. Whatever the OEM se...