Search found 425 matches
- Sun Aug 16, 2020 1:43 pm
- Forum: Engine Tech
- Topic: Alum Head Crack by Valvecover Rail
- Replies: 21
- Views: 1557
Re: Alum Head Crack by Valvecover Rail
Had I opened the box and seen that the dust wouldn't have made it out of the box before it was back in the mail. Buy new parts, spend 100% quality money, expect 100% quality parts. Let them deal with the shipper, not you. Heads are everywhere.
- Sat Aug 08, 2020 10:22 pm
- Forum: Engine Tech
- Topic: BBC 7" Damper vs 8" Damper
- Replies: 20
- Views: 3494
Re: BBC 7" Damper vs 8" Damper
I went with the ATI on this 565 and am satisfied with the choice.
- Sat Aug 08, 2020 10:21 pm
- Forum: Engine Tech
- Topic: "Fluid Damper" brand of crankshaft damper
- Replies: 17
- Views: 3704
Re: "Fluid Damper" brand of crankshaft damper
I have a 500 inch internally balanced bbc which makes roughly 700hp. I have run the Fluidamper on this engine since the beginning. I ran the engine on a drag/street car for 7+ years before I chose to freshen it up. Bearings had minimal wear and Marine Crankshaft checked the crank out and the engine ...
- Thu Apr 02, 2020 2:01 am
- Forum: Engine Tech
- Topic: Big block road race build 572
- Replies: 52
- Views: 7184
Re: Big block road race build 572
I think I'd go with a 112lsa but with less split on the cam. Those heads won't need too much split as the exhaust flow is very good. FWIW, closely inspect the heads and valve job. I doubt you'll more than 850hp but the trque should be in the mid 700's.
- Fri Mar 27, 2020 3:01 pm
- Forum: Engine Tech
- Topic: New lifters on the way !!
- Replies: 32
- Views: 4551
Re: New lifters on the way !!
Valve angles
- Thu Mar 26, 2020 4:06 pm
- Forum: Engine Tech
- Topic: New lifters on the way !!
- Replies: 32
- Views: 4551
Re: New lifters on the way !!
What kind of spring pressures and lift and how long are you running these bush lifters ? We are always battling needle failure on serious street engines. Still unsure of bush lifters in long term stop start street race engines Must be a reason why NASCAR don't use the!! I'd rather take a chance on ...
- Fri Oct 25, 2019 1:17 pm
- Forum: Engine Tech
- Topic: C8 Corvette dynos high???
- Replies: 26
- Views: 2788
Re: C8 Corvette dynos high???
60-70 yr old dudes are the guys who can afford them lol Its pretty common to see hp and tq differences in different gears on some non loaded dynos. But these numbers arent real. Show me the time slip The new Fad is no time racing so I guess nobody cares what a car runs except the guy with the most ...
- Wed Oct 16, 2019 2:16 pm
- Forum: Engine Tech
- Topic: Welding crank journals
- Replies: 18
- Views: 14460
- Wed Jun 26, 2019 12:22 pm
- Forum: Engine Tech
- Topic: A reply to camking
- Replies: 3
- Views: 1223
Re: A reply to camking
At 20 I'm in. Set up a way to pay.
- Sun Jun 09, 2019 2:06 pm
- Forum: Engine Tech
- Topic: hard cranking once and a while
- Replies: 26
- Views: 2634
Re: hard cranking once and a while
Start retard? Timing on my BBC is locked out. 14 to 1 comp. I pull 20* when starting and throttle position is also a factor.
- Fri Jun 07, 2019 12:11 pm
- Forum: Engine Tech
- Topic: Big block Chevy street engine headers question
- Replies: 38
- Views: 2911
Re: Big block Chevy street engine headers question
2" will not gain power on that combo. Glass packs aren't an efficient muffler. Side pipes are typically noisy.
- Wed Jun 05, 2019 5:09 pm
- Forum: Engine Tech
- Topic: DV - need intern to help out wih project backlog.
- Replies: 41
- Views: 5989
Re: DV - need intern to help out wih project backlog.
60 IS youthful though.
- Wed Jun 05, 2019 1:22 pm
- Forum: Engine Tech
- Topic: DV - need intern to help out wih project backlog.
- Replies: 41
- Views: 5989
Re: DV - need intern to help out wih project backlog.
I see it as a great opportunity for a youthful ambitious mind.
- Wed Jun 05, 2019 1:17 pm
- Forum: Engine Tech
- Topic: New look for Speed Talk, coming soon
- Replies: 69
- Views: 8383
Re: New look for Speed Talk, coming soon
Congrats on the new venture. I'm sure the legacy will continue.
Long live Don Terrill's Speed Talk
Best Tech Forum on the WWW
Long live Don Terrill's Speed Talk
Best Tech Forum on the WWW
- Thu May 16, 2019 11:51 am
- Forum: Engine Tech
- Topic: Noob...oil pump choice
- Replies: 11
- Views: 2185