Search found 329 matches
- Wed Jun 01, 2022 3:33 pm
- Forum: Engine Tech
- Topic: Oldsmobile 350 bearing clearences
- Replies: 4
- Views: 503
Re: Oldsmobile 350 bearing clearences
No not cross drilled and 7200 haven’t made a choice on bearings yet
- Tue May 31, 2022 12:49 am
- Forum: Engine Tech
- Topic: Oldsmobile 350 bearing clearences
- Replies: 4
- Views: 503
Oldsmobile 350 bearing clearences
What do you guys recommend for bearing clearences on an olds 350 I’m running 2” rod journals 2.5” mains
- Tue May 17, 2022 12:49 pm
- Forum: Engine Tech
- Topic: Olds 374 stroker
- Replies: 1
- Views: 351
Olds 374 stroker
This build consist of Sbc 4.125 pistons bb e heads that flow about 240/250 victor intake crower solid cam .552 int .568 ex 108 10.25 :1 comp .028 cometics hoping for 480/500 hp any thoughts?
- Tue May 10, 2022 10:23 am
- Forum: Engine Tech
- Topic: Olds 455 torker vs Holley street dominator?
- Replies: 4
- Views: 697
Olds 455 torker vs Holley street dominator?
What would be the better choice have used a torker came a cross a Holley intake just wondering if there is any performance to be gained motor is a 468 11:1 comp with a solid roller cam
- Sat Nov 27, 2021 2:54 am
- Forum: Engine Tech
- Topic: Polishing side beams
- Replies: 23
- Views: 3328
Polishing side beams
Is it worthwhile and do they need to be shit peened afterwards
- Sun Nov 14, 2021 4:34 pm
- Forum: Engine Tech
- Topic: Olds 355
- Replies: 1
- Views: 383
Olds 355
Trying to squeeze 400hpnout of this current build 350 .030 over trw flattops stock rods and crank # 5 heads milled to 65 cc yielding 10:0 compression cam is xe284 .544” with 2”intakes 1.625”ex mild porting bowl clean up and gasket match Holley street dominator intake 750 Holley 1 3/4 headers any old...
- Thu Nov 04, 2021 9:01 am
- Forum: Engine Tech
- Topic: Olds 425 vs 455
- Replies: 3
- Views: 1170
Olds 425 vs 455
425 bb olds pros and cons over 455 I know cubes rule but looking to go in different direction both would be 7” rods
- Tue Nov 02, 2021 9:26 pm
- Forum: Engine Tech
- Topic: Olds pro comp
- Replies: 2
- Views: 550
Olds pro comp
Just purchased a pair of pro comps for my Oldsmobile they’re supposed to be a copy of edelbrocks anyone have real world experience with these heads will I see an improvement over stock
- Tue Nov 02, 2021 5:17 pm
- Forum: Engine Tech
- Topic: Installed hieght
- Replies: 5
- Views: 700
Installed hieght
Comp 947 bbc springs. Comp 680” .714” solid roller what do you guys recommend for open and closed pressures?
- Sun Oct 31, 2021 4:20 pm
- Forum: Engine Tech
- Topic: Nitrous on 906 vortec
- Replies: 1
- Views: 333
Nitrous on 906 vortec
How much can I safely shoot on 906 vortec heads
- Thu Oct 28, 2021 12:54 pm
- Forum: Engine Tech
- Topic: 377
- Replies: 17
- Views: 2231
Re: 377
Large bore 350 stroke
- Wed Oct 27, 2021 3:42 pm
- Forum: Engine Tech
- Topic: 377
- Replies: 17
- Views: 2231
377
Sbc 377 with 906 vortecs any thoughts?
- Tue Sep 14, 2021 12:35 am
- Forum: Engine Tech
- Topic: Holley 600 vac sec
- Replies: 4
- Views: 873
Holley 600 vac sec
No fuel flow thru the secondaries do they provide idle fuel? They open but no fuel flow through the boosters is something clogged?
- Tue Apr 27, 2021 9:48 pm
- Forum: Engine Tech
- Topic: 2.02 1.6 valves in vortec heads
- Replies: 3
- Views: 892
2.02 1.6 valves in vortec heads
Bigger valves in vortec heads to do or not to do
- Sun Apr 25, 2021 1:59 am
- Forum: Engine Tech
- Topic: Vortec 355
- Replies: 5
- Views: 684
Vortec 355
Is 450 hp attainable from stock 906 vortecs 10:1 comp