Search found 14 matches
- Sat Jan 27, 2024 5:18 pm
- Forum: Engine Tech
- Topic: Rebuilding a 350 HEADS
- Replies: 15
- Views: 906
Re: Rebuilding a 350 HEADS
The early 70's heads had the spring pockets all cut the same height. When the rotators were used they required a shorter spring 1.620 install height.
- Thu Nov 23, 2023 3:08 pm
- Forum: Engine Tech
- Topic: 71 chevy 350 headgaskets
- Replies: 16
- Views: 2800
Re: 71 chevy 350 headgaskets
mahle 5746 .026
- Sat Sep 30, 2023 6:58 pm
- Forum: Engine Tech
- Topic: Aluminum 5.3 LS max bore
- Replies: 3
- Views: 546
- Mon Sep 14, 2020 7:18 pm
- Forum: Engine Tech
- Topic: Help with 312 old y block Thunderbird engine.
- Replies: 8
- Views: 1038
Re: Help with 312 old y block Thunderbird engine.
The last one I did I cut a groove in block behind cam bearing to send oil to the heads then put a restrictor in each head to cut the flow down
- Thu Nov 29, 2018 6:29 pm
- Forum: Engine Tech
- Topic: Maker of 2.05 chevy valve?
- Replies: 18
- Views: 2775
Re: Maker of 2.05 chevy valve?
I think it's from Liberty Engine Parts. They rebox that number under part number tx205-1
- Thu Jun 14, 2018 7:25 pm
- Forum: Engine Tech
- Topic: GM LS steel main caps and line honing
- Replies: 11
- Views: 2377
Re: GM LS steel main caps and line honing
King has some over sized bearings
MB5766SI STD/001/010/020/030
Optional to MB5293SI (housing bore +.010")
MB5398SI
Optional to MB5293SI (housing bore +.020")
crank flange length mm
STD 26.08/26.03
010 26.11/26.06
020 26.11/26.06
030 26.11/26.06
MB5766SI STD/001/010/020/030
Optional to MB5293SI (housing bore +.010")
MB5398SI
Optional to MB5293SI (housing bore +.020")
crank flange length mm
STD 26.08/26.03
010 26.11/26.06
020 26.11/26.06
030 26.11/26.06
- Sat Apr 14, 2018 10:41 pm
- Forum: Engine Tech
- Topic: Factory Stock Replacement Blocks
- Replies: 8
- Views: 1770
- Sun Oct 15, 2017 8:31 pm
- Forum: Engine Tech
- Topic: Dart SHP Cam bearing failure
- Replies: 32
- Views: 6913
Re: Dart SHP Cam bearing failure
.0022-.0026
These were stock blocks and bearings were chp-8 mostly
These were stock blocks and bearings were chp-8 mostly
- Sat Oct 14, 2017 5:03 pm
- Forum: Engine Tech
- Topic: Dart SHP Cam bearing failure
- Replies: 32
- Views: 6913
Re: Dart SHP Cam bearing failure
I have seen a few cam bearing failures lately and they have all been Durabond
- Fri Mar 17, 2017 6:30 pm
- Forum: Engine Tech
- Topic: V6 Chev cam tunnel specs
- Replies: 2
- Views: 678
Re: V6 Chev cam tunnel specs
A 350 set will work,depends on which block you have. Some take #1 350 brg in front and back. This is from clevite. Cam Bearing Set AL-3 SH-1350S STD,10 1 SH-1349 1.8682/1.8692 0.0010/0.0050 0.0744 2.0190/2.0210 0.7500 2-4 SH-1350 1.8682/1.8692 0.0010/0.0050 0.0694 2.0090/2.0110 0.7500 3 SH-1351 1.86...
- Tue Feb 07, 2017 7:12 pm
- Forum: Engine Tech
- Topic: 289 ford cam brg
- Replies: 19
- Views: 2927
Re: 289 ford cam brg
The dura-bond 351hp-1r1 might work for you
- Mon Nov 07, 2016 8:56 pm
- Forum: Engine Tech
- Topic: Dart little M cam newton plug
- Replies: 4
- Views: 1003
Re: Dart little M cam newton plug
I think it is a EPC-92
- Wed Oct 05, 2016 8:45 am
- Forum: Engine Tech
- Topic: Pontiac straight 8 connecting rod housing bore size?
- Replies: 4
- Views: 1220
Re: Pontiac straight 8 connecting rod housing bore size?
From Prosis 2.1245-2.1255
- Sat Oct 01, 2016 8:52 pm
- Forum: Engine Tech
- Topic: Head gasket bolt patterns..
- Replies: 6
- Views: 1371
Re: Head gasket bolt patterns..
A LS has the same head bolt pattern as a 302 ford