Don Terrill’s Speed-Talk

Thanks for your replies, much appreciated

Okay, Thanks Knight, appreciated.

Hi, I am wanting to build a stroker 8.2 deck Windsor, and would like to get a custom crank built. Whats the longest strokes anyone has seen with an 8.2 Deck? Using Honda B16, 1.888 journal, 5.290" Manley turbo tuff Rods, I would like to do either a 3.69 stroke with 1.065 compression height cust...

Okay, thanks guy's, much appreciated.

Yeah, I have a new set of Crane 44808-1 Pro series Shaft rockers, thats another reason i'd like to stay with these heads. Would definitely run the titanium retainers as well. Hoping for 540 minimum

Can anyone point me to someone with a cnc programme for the Victor Jr's in Australia

Im leaning toward having the Edelbrock heads ported, recommended springs, titanium retainer's (have), possibly new valves if they wont be up for trips to 8200.

Hi guy's, I was wondering peoples views on head choice out of the 2 sets I already own for the following 347 build... 347 ci Mexican Block .060" bore 13:1 compression - Crane F-272/400-2S-6, rpm range 4500-7900 with 347 cubes, @ .050" - 272/276, adv 308/312, LSA 106, lash .018 .018, lift ....

Okay, thanks guys , i'm off to give it a crack.

Hmm, the bolt holes may need elongating, if the manifold sits lower, maybe the top of the manifold intake ports would sit lower, so if I ported the top of the intake ports on the manifold it might align Thanks, for the reply

Hi, I have an intake manifold I'm going to attempt to fit tomorrow (Super Victor) onto a 220 AFR headed 414 Windsor stroker. The inlet was bought secondhand and I was told it was port matched to AFR 220 heads. I noticed while cleaning it today that it appears to have been machined quite a bit at the...

Yeah, id have to use other crank for use with the 3" main. Thanks guys

Okay, thanks, Just seeing if they were usable, i think ill move em on, I dont have a use for them, what would you recommend as a minimum ring land thickness for boost while im shopping for pistons?

Ok, thanks Knight, im hearing ya, what if i used em in a 351w block i have laying around, would the ring land still be a problem?

I just took a stab at the cubic inch, theyre actually 4.056, and i was going to half grout the block ??? Just checked it at 335.9 cubes, cant rough guess anything around here without being called on it lol...