Thanks for all your thoughts ,
So far it looks like it should work ,
one plus is we can make an oversize cam for the bearing surface , which on this motor just turn in the engine block without replaceable bearings .
then we can bore the cam bearing surface oversize to fit ,
thanks again
Search found 12 matches
- Wed Aug 12, 2020 10:52 am
- Forum: Engine Tech
- Topic: Machining cam blanks from Dura-Bar cast iron bar stock ?
- Replies: 17
- Views: 1555
- Tue Aug 11, 2020 8:07 pm
- Forum: Engine Tech
- Topic: Machining cam blanks from Dura-Bar cast iron bar stock ?
- Replies: 17
- Views: 1555
Re: Machining cam blanks from Dura-Bar cast iron bar stock ?
I don't have a cam in front of me right now but I would think about 2 1/2 inch where the gear bolts on ,
- Tue Aug 11, 2020 3:22 pm
- Forum: Engine Tech
- Topic: Machining cam blanks from Dura-Bar cast iron bar stock ?
- Replies: 17
- Views: 1555
Re: Machining cam blanks from Dura-Bar cast iron bar stock ?
Yes the Durabar is pricy , but a VW cam is only about a foot long , and the stock cam was cast iron , so the lifters hopefully will be Ok , Thats what I worry about with tool steel , that it is too hard and will eat up the stock lifters, we need to get the material of a stock cam tested so we know t...
- Tue Aug 11, 2020 1:47 pm
- Forum: Engine Tech
- Topic: Machining cam blanks from Dura-Bar cast iron bar stock ?
- Replies: 17
- Views: 1555
Machining cam blanks from Dura-Bar cast iron bar stock ?
Hi , We need some blanks for an early VW bug motor from the 50s , the later 1960s and up model blanks are available , but we have not found the early blanks and its an interesting challenge ! We have a buddy with a CNC machine shop that can machine the round bar stock into a blank , and we have an i...
- Mon Aug 03, 2020 10:39 am
- Forum: Engine Tech
- Topic: Where to order camshaft blanks - unground cams to grind
- Replies: 18
- Views: 2827
Re: Where to order camshaft blanks - unground cams to grind
CamKing said "Your best bet, is Engine Power Components. I've talked to a few companies out of China, and they will do small runs(200-500 pieces), at a reasonable price. Thier quality looks good, but I've never used them." Just got off the phone with Engine Power Components , They do not m...
- Tue Jul 28, 2020 1:53 pm
- Forum: Engine Tech
- Topic: Where to order camshaft blanks - unground cams to grind
- Replies: 18
- Views: 2827
Re: Where to order camshaft blanks - unground cams to grind
Thanks , these are already made in batches in Turkey and probably other places ,
they are way less than $100 each at retail.
and we have a cam grinding machine ......
they are way less than $100 each at retail.
and we have a cam grinding machine ......
- Tue Jul 28, 2020 1:35 pm
- Forum: Engine Tech
- Topic: Where to order camshaft blanks - unground cams to grind
- Replies: 18
- Views: 2827
Re: Where to order camshaft blanks - unground cams to grind
Thanks Guys , Still no reply from Estas , I will send them an email to the main office in Turkey tonight , I am first trying to figure out who makes these blanks , their "buy in" may be so high its not interesting , or its not normally in stock , the 1600 cc aircooled bug motor is the easy...
- Mon Jul 27, 2020 7:36 pm
- Forum: Engine Tech
- Topic: Where to order camshaft blanks - unground cams to grind
- Replies: 18
- Views: 2827
Re: Where to order camshaft blanks - unground cams to grind
Pistons are easy , just $100-$150 each ,
Cranks are also made by SCAT and others , just lots of $$$
These camshaft blanks are being made , just not sure by who , or if they are exclusive to someone ,
Camking hopefully will see this and comment ,
cheers
Cranks are also made by SCAT and others , just lots of $$$
These camshaft blanks are being made , just not sure by who , or if they are exclusive to someone ,
Camking hopefully will see this and comment ,
cheers
- Mon Jul 27, 2020 7:05 pm
- Forum: Engine Tech
- Topic: Where to order camshaft blanks - unground cams to grind
- Replies: 18
- Views: 2827
Re: Where to order camshaft blanks - unground cams to grind
I found these guys
https://www.estasusa.com/contact.php
They are making them in Turkey according to the website ,
Sent them an email this morning but no answer yet ,
https://www.estasusa.com/contact.php
They are making them in Turkey according to the website ,
Sent them an email this morning but no answer yet ,
- Mon Jul 27, 2020 12:00 pm
- Forum: Engine Tech
- Topic: Where to order camshaft blanks - unground cams to grind
- Replies: 18
- Views: 2827
Where to order camshaft blanks - unground cams to grind
Hi
Does anyone know where we can order camshafts blanks that we can grind at our shop ?
I was told they were being made in Turkey , I talked to a few companies at SEMA a few years ago but lost my notes !
Anyway we need aircooled VW ones and also early Fiats ,
Thanks for your help
Does anyone know where we can order camshafts blanks that we can grind at our shop ?
I was told they were being made in Turkey , I talked to a few companies at SEMA a few years ago but lost my notes !
Anyway we need aircooled VW ones and also early Fiats ,
Thanks for your help
- Fri Dec 06, 2019 3:12 pm
- Forum: Chassis / Suspension / Body
- Topic: ZF steering box needs rebuild - 1970 VW bus
- Replies: 2
- Views: 1028
ZF steering box needs rebuild - 1970 VW bus
Does anyone know of a shop that restores ZF steering boxes ?
we have a 1970 VW double cab pickup and the steering box is worn out at 250,000 miles !
We are in SoCal , but we could ship it if some has done these before ,
Thanks for your help
we have a 1970 VW double cab pickup and the steering box is worn out at 250,000 miles !
We are in SoCal , but we could ship it if some has done these before ,
Thanks for your help
- Thu Dec 05, 2019 6:07 pm
- Forum: Engine Tech
- Topic: 3D Printing - Cool Assembly Tools?
- Replies: 42
- Views: 8099
Re: 3D Printing - Cool Assembly Tools?
If anyone is in the Los Angeles area and wants to make some stuff , I have a few rolls of PLA to help out ,
Thingaverse has shared free files to make all kinds of things , lots of automotive things
https://www.thingiverse.com/
Thingaverse has shared free files to make all kinds of things , lots of automotive things
https://www.thingiverse.com/