Search found 540 matches
- Sun Mar 10, 2024 7:11 pm
- Forum: Engine Tech
- Topic: Vacuum Pumps: Plumbing Arrangement
- Replies: 35
- Views: 1267
Re: Vacuum Pumps: Plumbing Arrangement
But if you have a engine designed for vac pump ,imo quite a bit can be learned. We just recently dyno tested a 380 inch sbc. We tried a new vac electric , new 4 vane from company we never tried before. Base engine made 893 hp after broke in. With electric pump that only pulled 11" it made 916 ...
- Sat Mar 09, 2024 3:39 am
- Forum: Engine Tech
- Topic: Inexpensive 350 Build
- Replies: 129
- Views: 6942
Re: Inexpensive 350 Build
It's simple Ripper's engine is not making the hp that the dyno printed out.
- Fri Mar 08, 2024 5:23 am
- Forum: Engine Tech
- Topic: Inexpensive 350 Build
- Replies: 129
- Views: 6942
- Thu Mar 07, 2024 11:53 pm
- Forum: Engine Tech
- Topic: 401 sbc ready for the Dyno
- Replies: 104
- Views: 4585
Re: 401 sbc ready for the Dyno
Looking good should be a nice mid to high 10 second street/strip beast....
Good luck if your doing more dyno work on the weekend it's going to be a hot one.
Good luck if your doing more dyno work on the weekend it's going to be a hot one.
- Mon Mar 04, 2024 6:33 pm
- Forum: Engine Tech
- Topic: Mission Impossible 318ci 318HP
- Replies: 127
- Views: 10344
Re: Mission Impossible 318ci 318HP
How is this abortion not completed? Uncle Tony's project originally. 318 rebuilt with massaged standard parts, try and get 1 for 1 with BBD carb hence Mission Impossible. Went to Vizard, Vizard said after the 2 barrel dyno runs lets chuck a 4 barrel on it and we'll have our 318HP. Vizards mate Andy...
- Fri Mar 01, 2024 1:07 am
- Forum: Engine Tech
- Topic: Intake Manifold Porting Show ‘n Tell
- Replies: 729
- Views: 596854
Re: Intake Manifold Porting Show ‘n Tell
If there's something weird and it don't look good, Who ya gonna call?........,"CHADBUSTERS".....
- Tue Feb 27, 2024 6:27 am
- Forum: Engine Tech
- Topic: SBC Oil Filter: 2024's Options?
- Replies: 56
- Views: 2070
Re: SBC Oil Filter: 2024's Options?
Don't know how true it is, but was told that baldwin filters make the moroso and jomar filters......
- Mon Feb 26, 2024 3:26 am
- Forum: Engine Tech
- Topic: 401 sbc ready for the Dyno
- Replies: 104
- Views: 4585
Re: 401 sbc ready for the Dyno
Ok as a Ford man i'll go..........
525hp @5900rpm
520tq @4500rpm
Good luck and who's dyno?
525hp @5900rpm
520tq @4500rpm
Good luck and who's dyno?
- Sat Feb 24, 2024 6:15 pm
- Forum: Engine Tech
- Topic: camshaft intake valve closing
- Replies: 98
- Views: 4587
Re: camshaft intake valve closing
Warp Speed, I was referring to the 19000+ cam dyno tests that D. Vizard did while contracted to Crane Cams. You have tested a few hundred? Well you have only got about 18000 to go to catch up to DV..... I have NEVER mentioned the number 500,000. Someone else did....I also find the number incredible...
- Sat Feb 24, 2024 6:02 pm
- Forum: Engine Tech
- Topic: Cam Spec.’s for GM’s new 1000 HP pump gas engine
- Replies: 81
- Views: 9424
- Wed Feb 21, 2024 5:21 am
- Forum: Engine Tech
- Topic: Comp Evolution lifters
- Replies: 10
- Views: 640
Re: Comp Evolution lifters
Good article, but..... If the diam of the new 'cartridge' is smaller [ they say the volume is smaller ], then there is more load from the valve springs trying to bleed down the oil....& cause lifter bleed down. If you tighten clearances to reduce bleed down, you also increase the risk of a smal...
- Wed Feb 21, 2024 12:00 am
- Forum: Engine Tech
- Topic: Comp Evolution lifters
- Replies: 10
- Views: 640
- Thu Feb 15, 2024 6:22 pm
- Forum: Engine Tech
- Topic: Intake Manifold Porting Show ‘n Tell
- Replies: 729
- Views: 596854
Re: Intake Manifold Porting Show ‘n Tell
Some CLEVELAND BILLET madness!! =D> https://scontent.fmel8-1.fna.fbcdn.net/v/t39.30808-6/427453959_779468250876715_2289614064705904651_n.jpg?stp=cp6_dst-jpg_s600x600&_nc_cat=107&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=GuPnOf_-w-AAX_V6vHF&_nc_ht=scontent.fmel8-1.fna&oh=00_AfAGOWfciBjKo...
- Wed Feb 14, 2024 4:23 am
- Forum: Engine Tech
- Topic: Carb recommendation SBC 383
- Replies: 80
- Views: 3574
Re: Carb recommendation SBC 383
IMO Twin blade 800cfm....
- Sun Feb 04, 2024 6:10 pm
- Forum: Engine Tech
- Topic: .842 solid roller lifter needle or bushed??
- Replies: 22
- Views: 1562
Re: .842 solid roller lifter needle or bushed??
At min step up to a .904 lifter.