Search found 5 matches
- Sun Jan 10, 2021 11:08 am
- Forum: Engine Tech
- Topic: Stock LS lifters for cam
- Replies: 3
- Views: 574
Stock LS lifters for cam
I have a BTR cam for a LS the cam lift is 560 the question is can I use stock lifters with this cam ? Any information would be great thanks
- Wed Oct 07, 2020 7:03 pm
- Forum: Engine Tech
- Topic: Brake in oil
- Replies: 19
- Views: 1976
Brake in oil
How dirty should brake in oil get with sheer metal ? Bin using my engine run stand to brake in motors an when I drain the the oil seam to have a slight sliver tint to it ! I use black moley on the cams so the oil is dark an I cut the filters open to check for metals but seem to be clean ! I use br30...
- Wed Oct 07, 2020 6:41 pm
- Forum: Engine Tech
- Topic: Honing 2 stroke cylinders
- Replies: 11
- Views: 1530
Re: Honing 2 stroke cylinders
I use sunnen key way stones that are for two stroke cylinders . You can get them from Goodson or sunnen work realy good that is all I use !
- Wed Sep 30, 2020 7:19 am
- Forum: Engine Tech
- Topic: Rear main seal leak sbc
- Replies: 11
- Views: 2110
Re: Rear main seal leak sbc
The oil I am using is drive br30 an a melling 55a pump . It don’t leak at around 1500 rpms an 60 psi ! But when you run it up to 3 or 4000 it starts to drip oil and I didnt off set the seal !
- Tue Sep 29, 2020 6:50 pm
- Forum: Engine Tech
- Topic: Rear main seal leak sbc
- Replies: 11
- Views: 2110
Rear main seal leak sbc
Having a problem with a 327 small journal cranks that I can stop leaking oil out of the seal ! The crank is at 2.430 because it have bin polished at the surface. I am running a felpro blue seal and install two of them all ready . Is there a seal out there that is tighter or any ideas that could help...