Search found 316 matches
- Sat Dec 19, 2009 4:42 pm
- Forum: Engine Tech
- Topic: E85 Help
- Replies: 39
- Views: 10897
- Thu Oct 08, 2009 3:01 pm
- Forum: Engine Tech
- Topic: TIG welding close to seats!
- Replies: 10
- Views: 1930
- Thu Aug 20, 2009 12:15 pm
- Forum: Engine Tech
- Topic: Fixing a main bore housing.
- Replies: 18
- Views: 2498
- Sat Jul 18, 2009 12:55 pm
- Forum: Engine Tech
- Topic: Professional advice...roller tips
- Replies: 26
- Views: 2702
- Sat Jul 18, 2009 12:33 pm
- Forum: Engine Tech
- Topic: Base-line 630 hp 383 SBC??
- Replies: 3
- Views: 1778
We are getting 640 with 215 iron eagles angle milled .385,flat top pistons 4.197 bore 3.210 stroke, roller cam 39 lb crank 520 gm. rods. This is a circle track combination with a power band from 5000 to 9200. I would think it would possible to get 630 with a small bore long stroke engine with a drag...
- Tue Jun 23, 2009 9:31 am
- Forum: Engine Tech
- Topic: ?? Best Aluminum 4bbl Intake for SBC Circle Track engine...
- Replies: 30
- Views: 9283
- Mon Jun 22, 2009 10:00 am
- Forum: Engine Tech
- Topic: ?? Best Aluminum 4bbl Intake for SBC Circle Track engine...
- Replies: 30
- Views: 9283
Re: Headers
I came from the machine shop today, pistons were worn out at the wrist pins, so installing new pistons/rings. (flat top 2 eye brow) Bore looked ok, just a hone.
If the pistons measure ok at the skirts just install oversize wrist pins.Bill
If the pistons measure ok at the skirts just install oversize wrist pins.Bill
- Sat Jun 20, 2009 2:19 pm
- Forum: Engine Tech
- Topic: ?? Best Aluminum 4bbl Intake for SBC Circle Track engine...
- Replies: 30
- Views: 9283
- Sat Jun 13, 2009 3:51 pm
- Forum: Engine Tech
- Topic: Clevite IRL journal (1.850) Rod bearing help.
- Replies: 4
- Views: 1457
- Sat May 30, 2009 1:17 pm
- Forum: Engine Tech
- Topic: Making Smaller Wrist pin bushings for GM 6"rods
- Replies: 9
- Views: 2118
Precision Products is in Arden N.C. 800-421-9150
www.pppcenter.com Bill
www.pppcenter.com Bill
- Sat May 30, 2009 12:01 pm
- Forum: Engine Tech
- Topic: EGT& air bleed tuning
- Replies: 18
- Views: 2267
- Fri May 22, 2009 9:05 am
- Forum: Engine Tech
- Topic: Rev limiter ?
- Replies: 11
- Views: 2088
- Thu May 21, 2009 7:36 pm
- Forum: Engine Tech
- Topic: Rev limiter ?
- Replies: 11
- Views: 2088
- Thu May 21, 2009 6:31 pm
- Forum: Engine Tech
- Topic: SBC Connecting Rod Length
- Replies: 27
- Views: 11952
We along with most circle track engine builders use the longer rods to cut weight out of the pistons and it does result in more power past peak power. Not sure if its the speed change as much as weight. Look on page 13 in the ARP book,they have a chart showing the load against a rod cap at various r...
- Thu May 21, 2009 6:03 pm
- Forum: Engine Tech
- Topic: Rev limiter ?
- Replies: 11
- Views: 2088