Don Terrill’s Speed-Talk

Shop has been around since 60 years and in that time has collected a LOT of old catalogs. Maybe 200 cubic feet worth Sealed power, perfect circle, manley, clevite, FM, moog, pioneer, ect. I'm afraid most of then are headed to the landfill Is there anybody who scans and digitizes this old stuff? By ...

rewguy wrote: ↑Thu Dec 28, 2023 1:29 pm I've dealt their product for 25 years. But this wait time is insane???.

Most companies are off untill Jan 2, 2024. I called Trends yesterday and that is the message I got from them.

Hi I am going through my cylinder heads and want to replace the metal clad valve seals. What methods of removal process does speed talk recommended. Thanks for any information you can give. Tom This is what I use to get the metal clad seals off the guide. This is a tool used to remove plastic door ...

BillK wrote: ↑Mon Nov 20, 2023 8:08 pm Does the "BC" maybe stand for Bullet Cams ?

I don't know, that's why I posted to see if anybody could identify it.

This cam cam up for sale and the seller dose'nt have any cam specs. He mic'd the lobes and the lift should be .580 both in & ex. And he thinks the HR110 being 110 lobe separation angle. So, anybody out there recognize the cam and know who the manufacture might be?

Thanks for looking,

Kind of strange……. The “B” after the 3303 designates the master used was for a bigger base circle application. Typically, on a SBC the suffix is an “S”. This lobe is from the Extreme 4x4 family. The exhaust lobe is from a family designed for use in LS1 applications. Specs: 265/278@.006 216/224@.050...

Can you identify this SBC hyd roller cam? I've searched on the net with No Luck.

Thanks,

Who is RET, can you give me a full name?
Thanks

mdabbott2009 wrote: ↑Fri Oct 27, 2023 1:34 pm Heads already have 2.05/1.5 valves done by guy in Michigan flowed 270at 550 for OEM head class race deal

Who is the go to guy in Michigan?

You will need a "Slow Bleed rate" lifter, or you will run the risk of the lifter collapsing at higher RPM's. GM found this out, when they went to the 1.8 rockers on the LS7, and had to come out with the LS7 lifters with a slower bleed rate. Mike, Thanks for the reply. What I do have is a ...

Can a Guy use up to a 1.8 rocker ratio on a hyd roller cam? Is this lifter brand-type dependent? I have a new set of Comp Cams SS 1.8 and 1.6 ratio that I want to use. Fire away I'm all ears.
Thanks for looking,

Hey Larry, Thanks for bringing back the test examples on your SB Super Stock head development. I see you posted a picture of Danny Helmer 67 SS/I Camaro. I had the chance to meet and talk with Danny at Indy US Nationals back in late 80's. Talk about a Beautiful Camaro and the attention to details. I...

This is a new engine build, SBC 383 with Chevy Turbo 292 heads, [the heads are in excellent condition, were pocket ported with 2.050 intake valve many years ago and have been in storage] dome piston, roller cam,4150 flange carb, trailered drag race, foot brake car. [possible Methanol fuel] The expe...

Ford Holley Carbs for sale will need restoring and rebuilding. Missing a few parts, but a guy the dose restoring work will have the pieces. Carb #1 C9OF-9510-H 735cfm List 4345 921 1969 Feb 1st week Talladega,Torino, Cyclone, Fairlane, Montego 428 SCJ/CJ $550.00 plus shipping Open the flickr links ...

Ford Holley Carbs for sale will need restoring and rebuilding. Missing a few parts, but a guy the dose restoring work will have the pieces. Carb #1 C9OF-9510-H 735cfm List 4345 921 1969 Feb 1st week Talladega,Torino, Cyclone, Fairlane, Montego 428 SCJ/CJ $550.00 plus shipping Open the flickr links b...