Search found 1636 matches
- Sat Dec 24, 2016 12:56 am
- Forum: Offtopic Forum
- Topic: Takata air bags
- Replies: 16
- Views: 11977
Re: Takata air bags
IMO the number one reason we got air bags, is to prevent the vehicle to be used as a weapon over and over again. With air bag cars, the first hard impact blows the drivers hands off the steering wheel and the vehicle stops--every single time. No more ramming closed gates at speed and keep on going. ...
- Fri Dec 16, 2016 10:01 pm
- Forum: Engine Tech
- Topic: 2 Stroke Oil Substitution
- Replies: 12
- Views: 3239
Re: 2 Stroke Oil Substitution
I recall ages ago in the early 80's I knew a punk who on spite wanted to ruin a 2 stroke engine on some moped he swiped from some kid he hated :? He ran and ran that little bike with the cheapest gasoline sold which was the old leaded 89 octane, after the 3rd tank the engine still seem to be running...
- Fri Dec 16, 2016 3:02 pm
- Forum: Engine Tech
- Topic: 2 Stroke Oil Substitution
- Replies: 12
- Views: 3239
2 Stroke Oil Substitution
I ran outta 2 stroke oil for my snow blower, the snow blowers gas tank is half full and I like to top it up with more gasoline. Would a little bit a tranny oil or motor oil hurt. I'm thinking motor oil might clog the tiny carburetor.....I know I should just get out there and buy some more 2 stroke o...
- Sun May 17, 2015 11:12 pm
- Forum: Engine Tech
- Topic: First drive, 2015 Z06.
- Replies: 3
- Views: 1203
Re: First drive, 2015 Z06ir .y
Bet it Falls competeIy apart on any impact.....might as weII get a motorbike, it be as quick, cheaper an not anymore dangerous, IMO Oh thats right, nobody ever thinks they wiII hit anything,,,an if so, the air bags wiII save them :lol: How come big buck nascar thows those air bags away...I guess the...
- Thu May 07, 2015 1:22 am
- Forum: Engine Tech
- Topic: Edelbrock Air Gap dual quad setup for 351/427Windsors
- Replies: 43
- Views: 7842
Re: Edelbrock Air Gap dual quad setup for 351/427Windsors
Using two 500 Carter's on a Mopar 340 with an Edelbrock d 64 man. I Iove it, engine idles great yet screams when needed :lol: Remove both air secondary doors--one gone was nice, both gone are better,so Iong the rpms' are there..3000 staII, 3.90 gears.... 4.30's be better stiII...secondaries were too...
- Sun Jan 04, 2015 11:30 pm
- Forum: Engine Tech
- Topic: What will it take to make 575 flywheel by 7,500 rpm with a
- Replies: 160
- Views: 22253
Re: What will it take to make 575 flywheel by 7,500 rpm with
Maybe it can be done but why ? It be cheaper and easier to make 575 HP with a larger engine. Nobody really cares how small or large an engine is, they just care about how fast the car goes
- Sat Jan 03, 2015 11:19 pm
- Forum: Offtopic Forum
- Topic: WHAT DO I DO WITH MY SON ????? Caution!!!!!!
- Replies: 108
- Views: 33436
Re: WHAT DO I DO WITH MY SON ????? Caution!!!!!!
Saddest thread I've ever seen, I too was wishing for a better ending.
- Mon Dec 02, 2013 9:05 pm
- Forum: Engine Tech
- Topic: Fast and furious
- Replies: 68
- Views: 7198
Re: Fast and furious
I'll bet princess Diana wishes she had driven herself too. Just wearing her seatbelt would have saved her life, and she probably would have walk away.. She was sitting in the safest seat in one of the world's safest cars. It took rescuers 2 hours to get Diana to the hospital, the long delay has nev...
- Sat Nov 30, 2013 10:52 pm
- Forum: Engine Tech
- Topic: Running Methanol Engine Outdoors in Cold Temps
- Replies: 24
- Views: 3516
Re: Running Methanol Engine Outdoors in Cold Temps
Some cardboard in front of the rad works great in cold temps if the thermostat is too cold or if the engine doesn't have one.
- Sat Nov 16, 2013 8:08 pm
- Forum: Engine Tech
- Topic: Junker engines punching above their weight
- Replies: 67
- Views: 18004
Re: Junker engines punching above their weight
I loved those days. I've also seen things done that worked that you would never think of unless your broke. Engines put together with NO gaskets, milling heads with a hand grinder and a file, I actually saw a guy bore a hole onetime in a block with a homemade extension on an angle grinder and sized...
- Sun Nov 10, 2013 7:38 pm
- Forum: Engine Tech
- Topic: GM Crate Burning #6 Piston
- Replies: 64
- Views: 6267
Re: GM Crate Burning #6 Piston
If GM is not covering the engines for marine use, that tells me the engines are not designed for marine use.
- Sat Nov 09, 2013 7:56 pm
- Forum: Engine Tech
- Topic: Importance of Valve Job
- Replies: 46
- Views: 10805
Re: Importance of Valve Job
Good info! Use a torque plate for valve jobs, make sense but I never would had guessed it
- Mon Nov 04, 2013 10:23 pm
- Forum: Engine Tech
- Topic: interesting old Weiand manifold - for mopar poly enthusiasts
- Replies: 9
- Views: 2222
Re: interesting old Weiand manifold - for mopar poly enthusi
Those 360 intakes were to breathe at higher rpms yet still work OK at lower rpm's. I used one on a mopar 318, liked it, pulled very well past 5,500. I did later replaced it with an Edelbrock rpm intake, the rpm seemed better everywhere expect 6,000 and higher, then the Weiand felt better. I left the...
- Sun Sep 01, 2013 1:26 am
- Forum: Engine Tech
- Topic: The next big thing - recorded exhaust sounds!
- Replies: 19
- Views: 4294
Re: The next big thing - recorded exhaust sounds!
Happen to come across this accident today in lovely Niagara Falls. The truck with the chrome bumper seems to held up OK but look at that car, it "felled" apart from just being rear ended. No sorry, cars from the past--1980 on down-did not fell apart so easily. (never mind the Pinto, that w...
- Sat Aug 31, 2013 7:27 pm
- Forum: Engine Tech
- Topic: The next big thing - recorded exhaust sounds!
- Replies: 19
- Views: 4294
Re: The next big thing - recorded exhaust sounds!
Don't laugh too hard, it just might work. Look how heavy chrome steel bumpers have been replaced by plastic yet the air bags (which still have warning stickers on the sun visors that they can kill or injure children) are now thought to be so much safer-better :roll: Then you got electronic speedo's ...