Don Terrill’s Speed-Talk

Hello guys yes I’m still interested in the C&D system I will print these out and go over them and I’m sure I will have some questions Thankyou

I would like to hear some feedback on repairing a block or head that repair the guy was doing was a LS exhaust manifold and I think it’s a lot fldiffernt then a block I myself have used a normal mig setup on a LS manifold without any issues

Has anyone tried the muggy weld cast iron rods to repair a cast iron engine block or cylinder head?

Is anyone using the blue box ? I would like to ask some general questions about saving files and opening them back up I find it difficult to use

Thankyou Vortec Pro

Vortec Pro they are A16-75

Int valve size is 2.065
5.230. oAL

Ex valve 1.720
5.360. oAL

Exhaust springs have a rotator on the bottom and intake have none

I have a set of 781 bb Chevy heads and the intake valves has a spring height of 1.750 can I cut .100-.130 off the spring seat so I can get a 1.850-1.880 spring height?

Do you have a way to lower the water pressure a bit? If so try it at 50psi these pumps flow more water lower then the max pressure when this happens is it peak tq of the engine?

I’m looking for a used weiand supercharger crank pulley either 6” or 7” 6 rib SERP

Wanted lower crankshaft pulley for a weiand 177 long nose super charger 6” or what ever for an Chevy

Message me or text

905-687-0355

I’m trying to find someone that can get me a pic of a diagram for a 2007 Chrysler aspen my F18 fuse has a short blows instantly manual says it’s cigar lighter I want to see if that circuit powers something else also because my power mirrors won’t work either

[*]on a 4l80 trans what one of these 2 shift controllers is better and why?

Jim if it’s ADL Lite pm me I can help you

Did anyone measure the valve guide clearance ? We had an engine on the dyno and after a few pulls it had a hard time getting past a certain rpm after many checks we could not find anything externaly wrong and after more pulls the engine tagged a valve once the heads were taken off you could see sign...

New Je forged flat top pistons 4.155 bore 1.125 ch 1/16-1/16-3/16 ring grooves Je file fit rings all brand new 750.00