Don Terrill’s Speed-Talk

A piece of Jim Feuling history. Don't know what it fits. Hilborn injector and barrel valve for a 4 cylinder. The rotary zero obstruction throttles are interesting, make a great conversation piece. Also have some small Hilborn fuel pumps, not included. Been collecting dust for too long. Make an offer...

Spring cleaning. Offroad trophy truck project that got shelved. Selling a complete engine seems to get pennies on the dollar. Will finish, sell complete, or anticipate easier to sell as unused parts. Application is high torque, dry sump, race gas engine that will be running just as strong after a 10...

Been covered up with work. Appreciate the info. Keep it coming. Thank you!

Thanks for the reply. Tried Edelbrock several times hoping for a different tech or different answer but no luck. Have a full plate scheduled thru tomorrow evening but will try calling Stewart Tuesday. Jones is a distributor for Edelbrock pumps, will check with them also.

Does anyone have any data as to flow potential of Edelbrock's Victor Pro 8827. I've tried several times to get info from Edelbrock with zero results. This is with their own advertising going on about their water pump dyno, equal flow rates per side, etc. Power tour type application with lots of btu'...

Changing price to $300. Brand new never used.

New, never used BHJ aluminum torque plate for Stage II Buick V6. 4.05 bore, DID (dialed in dowels). Jobber price to replicate is $532. Spring (summer?) cleaning. $375. Also have a pair of .047 copper gaskets to match. 4.03 bore.

Make yourself a test fixture where you have access to both ends of your head bolt to measure bolt stretch with a micrometer. You will find ARP's stainless head bolts allow a more proper bolt stretch for proper torque retention as opposed to standard high grade bolts that will tear the threads out of...

Old can and new can. Both spray red, REALLY sticky product that to me is identical to red high tack. Not brown or blue, doesn't foam either. Does like to clog the nozzle while spraying.

MSDS just seems to show propellants and solvents but appreciate the tip.

Is Mopar 04318035AA just repackaged Permatex High Tack spray or something different? In searching I've seen it referred to as being Hylomar but it doesn't seem to have the solvent evaporation action that Hylomar shows. Sure looks a lot like High Tack. Thanks

Who makes 1/2?

Have a MIRA (Swiss) setup with 3/4 inch straight shank ballhead driver (for Bridgeport) originally bought from Goodson. Only used on a couple sets of heads to cut the full valvejob. Bought a full guide and seat machine and have used the MIRA tooling on occasion to sweep the chamber etc. Includes 3/4...

Make sure your reduced diameter base on your locks aren't powdering away. Comp has their .550 seats instead of .600 and like to cut a big champher on the bottom of the lock leaving close to a knife edge. Doesn't last long. Don't know if your locks are coming loose or you are loosing your lash settin...

Early this year TK built a BBC with the centerfire heads for Terry Nish. The engine is going in some kind of charity project.