Don Terrill’s Speed-Talk

Talk some more about the technique of pouring molten aluminium into the heads to block off passages. Do you need to have the head at a certain temp while doing this ...? I ask because of the difference in coefficients of linear thermal expansion makes me concerned about stressing the casting and po...

On our obsolete iron heads: Block the exhaust heat crossover Large electric fan with shroud Outside cold air intake Fuel return line to the tank Custom ignition advance curve; lots of initial advance and plenty of vacuum advance at cruise. Tuning the carb with an on-board wide band O2 sensor. As li...

Engineers, students, and entrepreneurs worldwide can enter individually or as part of a team in any of seven categories: • Aerospace & Defense • Automotive/Transportation • Electronics • Manufacturing & Materials • Medical • Robotics & Automation • Sustainable Technologies Over $50,000 ...

These theses at MIT are available to read for free. There are other universities that will allow you to read engineering theses at no charge. If you check out the citations you can drill down and explore topics. However, one large limitation is your budget. Many references have a paywall, like SAE....

These theses at MIT are available to read for free. There are other universities that will allow you to read engineering theses at no charge. If you check out the citations you can drill down and explore topics. However, one large limitation is your budget. Many references have a paywall, like SAE. ...

Briefly, it appears that a decomposition product of a typical moly additive is both ferromagnetic and has a tan to brown appearance. This would be consistent with the additive fallout comment. https://www.researchgate.net/publication/301304965_New_insights_on_the_decomposition_mechanism_of_Molybdenu...

vannik wrote: ↑Sun Mar 31, 2024 2:23 am My understanding is Dr Charlie McCartan has stopped selling the software. But no official announcement.

Neels is too modest.

Camgrinder, you should visit the website below:

https://vannik.co.za/

https://vannik.co.za/About.htm

So AI called Dan Timberlake a "Guru" and "an experienced individual". If there were ever any doubts that AI is "Automated Imbecility" we now have our proof. “I don’t want to belong to any club that would accept me as one of its members.” Various versions attributed to ...

I just punched a 2010 Camry with a 2.5L engine after driving it for 3K I found out it is using 1 qt every 1000 miles. MFG call for 5w20 I am using 10w30 full synthetic which is expensive I a m thinking of switching to convention 10w30 much cheaper. Any opinions or real world experience. Here ya go:...

Try here:

https://www.cnczone.com/

B. C. Ames Co.
Waltham, MA, U.S.A.
Manufacturer Class: Metal Working Machinery

http://vintagemachinery.org/mfgindex/de ... 2292&tab=7

Real world feedback from Indiana!

She passed my test. With the re-tune she’ll pull the Jeep up the steepest hills around here on interstate 69 at at about 60 mph vs 55 and slowing prior to tune.

His Sprinter is the tow vehicle:

My Brother has a Mercedes Sprinter with the OM 642 turbocharged diesel in it. He is using it for towing.

Has anyone here installed a Boost Cooler Stage 2 kit on this particular engine?

I know there are magazine articles on Cummins and various other platforms.

Thanks for any leads.

I'm My Own Grandpa- Ray Stevens ( with family tree diagram)


https://youtu.be/eYlJH81dSiw