Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Search found 9 matches

by nabx22
Tue Jan 14, 2020 1:19 pm
Forum: Engine Tech
Topic: 4150 4778 Holley carb questions
Replies: 12
Views: 923

Re: 4150 4778 Holley carb questions

I have an 85 that is pretty much done that way.I used a 7530 team g intake with a 750 double pumper and a nitrous plate and the hood still closes with a low pro air cleaner
by nabx22
Sun Nov 25, 2018 6:43 am
Forum: Engine Tech
Topic: Matching cam
Replies: 8
Views: 986

Re: Matching cam

I run that same comp cam in my corvette with a 355 small block 11.1 motor.I have dart iron eagle 200 cc heads that have been ported and run a team g single plane intake with a 150 shot.The cam works really well for street strip.Also the 3.90 gears should work well with this cam I run 3.73.
by nabx22
Wed Aug 22, 2018 4:59 pm
Forum: Engine Tech
Topic: Daily Driver Quiet Exhaust
Replies: 6
Views: 1047

Re: Daily Driver Quiet Exhaust

Pypes race flow are what I have on a 13.5.1 bbc they are quiet.The race flow is quieter than any of pypes other mufflers
by nabx22
Wed Jun 27, 2018 1:46 pm
Forum: Engine Tech
Topic: N/A water injection question
Replies: 14
Views: 1133

Re: N/A water injection question

We run a 13 to 1 bbc on e85 from the pump it usually test at 75 % we never have any problems
by nabx22
Sun May 22, 2011 7:27 am
Forum: Engine Tech
Topic: Howards cams
Replies: 10
Views: 5349

Howards cams

Whats everybody think about howards cams.Especially the solid roller line they have.
by nabx22
Mon May 16, 2011 7:36 pm
Forum: Engine Tech
Topic: TH350 vs TH375b
Replies: 9
Views: 5065

Re: TH350 vs TH375b

tification The 400 transmission has a main case of cast aluminum alloy with a length of 24-3/8" long. Its aluminum case is essentially smooth. The rear mounting face of the transmission has a hex bolt pattern with ribs running forward longitudinally. The fluid pan shape is irregular (see image, left...
by nabx22
Fri Apr 17, 2009 1:20 pm
Forum: Engine Tech
Topic: Rocker arm ratio
Replies: 10
Views: 1261

Heres my question how much are you really giving up using a herbert roller.I have a 383 with ported mildly ported dart 200 cc heads 11.1 compression team g intake 150 shot of nitrous.this is in a 1978 Z/28 camaro that weighs approximately 3800 lbs with me in it.I am currently running a herbert solid...
by nabx22
Tue Apr 07, 2009 11:32 am
Forum: Engine Tech
Topic: team g
Replies: 3
Views: 745

This is going on a car that I drive on the street and run !/8th mile with too.Its a 78 Z/28 383 with 11.1 compression dart 200cc heads ported solid roller cam 253 in 260 ex at 50thousand 598 in lift 625 ex with 1.5 rockers.I have since changed to 1.6.the car has a 4200 stall and 4.56 gear with a 150...
by nabx22
Mon Apr 06, 2009 2:01 pm
Forum: Engine Tech
Topic: team g
Replies: 3
Views: 745

team g

whats everybody think about the team g intake for sbc