Don Terrill’s Speed-Talk

I had Roku as well as Sling. As long as you have good internet speeds they work well for most of the content. Live HD streaming requires quite a bit of bandwidth.

Congratulations Mike!!

I have to say that over the years I acquired a lot of customers who were tired of getting screwed over. While everyone is capable of making a mistake there's a big difference between a mistake and a pattern.

Unless you're trying to squeeze out every last tenth I would skip the Caltracs and use what Mother Mopar gave you. The original Caltrac setup was built by John Calvert for a 68 Mustang stock eliminator car. Like most non Chrysler leaf spring cars the Fords have the rear end mounted in the center of...

Were both valves in that cylinder still intact even if bent? Both valves were bent but not broke. no piston to valve issues with other cylinders So if both valves were intact ( just bent) in that chamber and looking at the top of the piston I would say something entered the chamber. Lots of impact ...

Were both valves in that cylinder still intact even if bent?

I'm in the maybe 20-30hp camp depending on the money spent. Lets say a hobbyist who isn't a pure newbie (maybe they've built a couple of previous engines) was spending $3500 on an engine and had a block and a crank to start with. He was farming out the machine work but doing the part selection and a...

Thanks Harry, and to you the same.

Thanks Harry.

All gave some, some gave all.

Is high hp useable in the States these days ? Over here it's really frustrating. Even my DD with 150 hp is too much at the speeds were allowed to drive here, the speed bumps, the speed camera's, the red lights,.... much easier...especially is the less populated areas of the country. There are stret...

Didn't someone a few years ago talk about "death panels" and was mocked for it? Hmmm what was her name again?

If you have a smartphone download the Google translate app. The app will do voice translation as well as photos not to mention the usual typed words.

When I purchased a digital measuring system for my homemade bench I got a plate with a hole in it that the instructions say flows 120 CFM so I laid it on my head deck and adjusted for 120 CFM @ 28" and put it away. Once in a while I check it and it is always good :) The bench is always consist...

Circlotron wrote: ↑Sun Mar 25, 2018 10:53 pm I'm logged in and I can read everything.

Must be just a glitch in the forum software. Mine says the same thing.

We used to do this all the time on our stocker engines. That and back cutting. Today it's available over the counter on many sizes. It's pretty amazing using a fish scale how close to the advertised force they are.