Search found 5890 matches
- Tue Sep 29, 2020 10:52 am
- Forum: Engine Tech
- Topic: NHRA 283cid Stocker Engine
- Replies: 33
- Views: 4546
Re: NHRA 283cid Stocker Engine
Off topic, but will probably fit in here? What engine combination allows an engine to have both the Hp and T curves to continue to go up after they cross at 5252 rpm? Please list compression ratios as well as cam spec's. The reason I ask is that if not mistaken, the old L-88 engine did this? Not sur...
- Tue Sep 29, 2020 10:41 am
- Forum: Engine Tech
- Topic: sbc ideal water pump pulley diameter?
- Replies: 6
- Views: 1075
Re: sbc ideal water pump pulley diameter?
Imho, the closer to the stock OEM pulley ratio's that you can get, the better off you will be.
Why? Because our beloved engines were designed to be this way.
pdq67
Why? Because our beloved engines were designed to be this way.
pdq67
- Tue Sep 29, 2020 10:26 am
- Forum: Engine Tech
- Topic: Was there ever --
- Replies: 14
- Views: 1516
Re: Was there ever --
^^^^^^^^^^^^^^^^^^^^^
Right!
This way..........Instead of this way.
O........O..........O.O........O.O
O........O
.
.
O........O..........O.O........O.O
O........O
pdq67
Right!
This way..........Instead of this way.
O........O..........O.O........O.O
O........O
.
.
O........O..........O.O........O.O
O........O
pdq67
- Tue Sep 29, 2020 2:32 am
- Forum: Offtopic Forum
- Topic: Notice To Veterans
- Replies: 78
- Views: 11872
Re: Notice To Veterans
My good Buddy Doc recently sent it to me.. Like two days ago!Dave Koehler wrote: ↑Fri Sep 25, 2020 7:43 am Home defense just got cooler.
Do I need one? nah
Do I want one? Ohhhh yeah
https://www.youtube.com/watch?v=RSzKU0v6roc&t=629s
Oh, and btw!! If you aren't willing to die for your freedom, then you don't deserve it!!
pdq67
- Mon Sep 28, 2020 2:07 pm
- Forum: General Tech
- Topic: Comparative strengths
- Replies: 15
- Views: 2148
Re: Comparative strengths
^^^^^^^^^^^^^^^^^ "Many exhaust heat wraps use ceramic fiber that itch like mad and probably aren't good for one's lungs. There's always a layer of sparklies in the engine bay near in situ installs." Might install the wrap wet??? And I am off the opinion that ALL heat resistant friable fib...
- Mon Sep 28, 2020 11:38 am
- Forum: Engine Tech
- Topic: Was there ever --
- Replies: 14
- Views: 1516
Re: Was there ever --
That's it, but just rotate the holes 90 degrees.
pdq67
pdq67
- Mon Sep 28, 2020 4:46 am
- Forum: Engine Tech
- Topic: Was there ever --
- Replies: 14
- Views: 1516
Re: Was there ever --
I figured one ran good, but just wondered if the 4 carbs were ever changed positions so that the barrels were over each port. If I was to get into this, I would hook up two carbs using a common butterfly shaft so that they would be in sync. down each side. Probably would simplify the linkage???? pdq67
- Mon Sep 28, 2020 3:58 am
- Forum: Engine Tech
- Topic: Was there ever --
- Replies: 14
- Views: 1516
Was there ever --
an intake manifold made like a Man-A-Fre that had the 2G/2Gc carb's turned so that they sat with each hole over an intake port? SBC here of course. This way..........Instead of this way. O........O..........O.O........O.O O........O . . O........O..........O.O........O.O O........O If not, then I'd ...
- Mon Sep 28, 2020 3:22 am
- Forum: Vintage/Classic/Historical Engine Tech
- Topic: Cam advice for a mild 327
- Replies: 32
- Views: 5858
Re: Cam advice for a mild 327
^^^^^^^^^^^^^^^^^^^^^^^^
If this is so, then I would go with re-faced stellite footed lifters if I can find them?
pdq67
If this is so, then I would go with re-faced stellite footed lifters if I can find them?
pdq67
- Sun Sep 27, 2020 10:46 pm
- Forum: Engine Tech
- Topic: Piston info
- Replies: 5
- Views: 685
Re: Piston info
You mean to say that Manley doesn't know what the spec's are for one of their own pistons??
pdq67
pdq67
- Sun Sep 27, 2020 10:32 pm
- Forum: Engine Tech
- Topic: Schubeck lifters question?
- Replies: 4
- Views: 1749
Schubeck lifters question?
I recently read somewhere that Schubeck had a partner in his lifter business? Anybody know who he was? And is Schubeck even still around? Oh, I finally found out what they made their , "ceramic' lifters out of. "The Shubeck lifters were sourced from Ceradyne in California and made from Sil...
- Sun Sep 27, 2020 9:03 pm
- Forum: Offtopic Forum
- Topic: Possible stroke?
- Replies: 7
- Views: 898
Re: Possible stroke?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Tried to edit my post above, but got timed out so here goes!! "Thanks Dave, That's how I found out about so asked for clarification. I am not that interested in it to read all i can about it is all. I just want him to die of natural causes when his time comes. B...
- Sun Sep 27, 2020 7:58 pm
- Forum: Offtopic Forum
- Topic: Possible stroke?
- Replies: 7
- Views: 898
Re: Possible stroke?
Thanks Dave, That's how I found out about so asked for clarification. I am not that interested in it to read all i can about it is all. I just want him to die of natural causes when his time comes. Now, the nancy, diane, the klingons, the mulatto, and a bunch of others can be elimin--, er, eh.... ne...
- Sun Sep 27, 2020 5:57 pm
- Forum: Offtopic Forum
- Topic: Possible stroke?
- Replies: 7
- Views: 898
Re: Possible stroke?
Kevin,
I don't watch TV at all.
pdq67
I don't watch TV at all.
pdq67
- Sun Sep 27, 2020 12:31 am
- Forum: General Tech
- Topic: Heavy duty engine degreaser
- Replies: 16
- Views: 3604
Re: Heavy duty engine degreaser
Will mollass cut crud or is it just for de-rusting?
pdq67
pdq67