Don Terrill’s Speed-Talk

vortecpro wrote: ↑Fri Mar 08, 2024 6:56 am

bob460 wrote: ↑Fri Mar 08, 2024 5:23 am How much NOS Mark........RIPPER might be watching......lol

Excuses as to why "Rippers" down 5 MPH to a heavier car with production heads. Gas & Carburetors NA

It's simple Ripper's engine is not making the hp that the dyno printed out.

vortecpro wrote: ↑Wed Mar 06, 2024 9:08 pm Ready to race.

How much NOS Mark........RIPPER might be watching......lol

Looking good should be a nice mid to high 10 second street/strip beast....

Good luck if your doing more dyno work on the weekend it's going to be a hot one.

How is this abortion not completed? Uncle Tony's project originally. 318 rebuilt with massaged standard parts, try and get 1 for 1 with BBD carb hence Mission Impossible. Went to Vizard, Vizard said after the 2 barrel dyno runs lets chuck a 4 barrel on it and we'll have our 318HP. Vizards mate Andy...

If there's something weird and it don't look good, Who ya gonna call?........,"CHADBUSTERS".....

Don't know how true it is, but was told that baldwin filters make the moroso and jomar filters......

Ok as a Ford man i'll go..........

525hp @5900rpm

520tq @4500rpm

Good luck and who's dyno?

Warp Speed, I was referring to the 19000+ cam dyno tests that D. Vizard did while contracted to Crane Cams. You have tested a few hundred? Well you have only got about 18000 to go to catch up to DV..... I have NEVER mentioned the number 500,000. Someone else did....I also find the number incredible...

HDBD wrote: ↑Sat Feb 24, 2024 9:23 am Curious what lifters they use?

Gm lifters .842 made by johnson i believe.......seat pressure is only 180 and 400 open.

Good article, but..... If the diam of the new 'cartridge' is smaller [ they say the volume is smaller ], then there is more load from the valve springs trying to bleed down the oil....& cause lifter bleed down. If you tighten clearances to reduce bleed down, you also increase the risk of a smal...

Have a read of this..........might help you.

https://www.raceenginesuppliers.com/Sup ... erformance

Some CLEVELAND BILLET madness!! =D> https://scontent.fmel8-1.fna.fbcdn.net/v/t39.30808-6/427453959_779468250876715_2289614064705904651_n.jpg?stp=cp6_dst-jpg_s600x600&_nc_cat=107&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=GuPnOf_-w-AAX_V6vHF&_nc_ht=scontent.fmel8-1.fna&oh=00_AfAGOWfciBjKo...

IMO Twin blade 800cfm....

At min step up to a .904 lifter.

Are you guys aware of any of the racing parts scam that are being done on some of racing part forsale sights.I just went through one on Racng Junk sight as a matter of fact I’ve been contacted twice by these scam artists and each came from racingjunk.And I’ve been contacted by a friend that got hit...