Don Terrill’s Speed-Talk

4150 style new carbs for E85 are in in the $900 TO $1050 range. For one carb the metering block kit is $208 then id need atleast 130 size stainless needle seat and new floats far as i know. Im gussing if i spent another $196.00 per carb for the annular booster 750 pro form main body id have roughly ...

Different size secondary not really a problem but if i had 2, 4779 instead would like it better then the 4780 is what i have. Had these carbs lying around for so many years never used them and canit even remember how i got them. Just on single 4 deals everyone with street cars seem to really like th...

I have 2 holley 4780, 800 DP holleys, im assuming the base plate is the same as 4779 , 750 DP. Would the pro form 750 aluminum main body with the annular boosters be worth me doing, are they decent quaility. Im trying to get to a two 4 manifold and have a sqaure carb not different size primary and s...

Maybe not good to use in a block for ring seal, but seems like would be good for cylinder heads.

I'm wondering why the OEMs or the aftermarket have not used cast steel to make cylinder block's or cylinder heads.

You always need your oiler ocilator windshield wipers for better vision the correct muffler bearings to match the better exhaust flow to intake flow ratio of your AFR heads. If you run open headers you wasted extra money on the AFR heads.

In my case I'm talking about the bore not the lifter.

The cheapest in cost tool steel lifter ( if there is such a thing ) is the howards, then trend then comp cams trying to make to much money.Being as I will be using extra clearance on the crank and rods with a higher volume pump, was thinking I might do both the edm lifter and groove the lifter bore,...

So I have bought a set of valve springs I want to use with a solid flat tappet cam comp 7228-16 single conical. 1.8 install, 136lb seat, up to 6.15 lift, 438 rate 412 open. So now I'm wanting a tool steel lifter. I see them with different size edm holes from .012 to .016 to. 025 with either a center...

So I have bought a set of valve springs I want to use with a solid flat tappet cam comp 7228-16 single conical. 1.8 install, 136lb seat, up to 6.15 lift, 438 rate 412 open. So now I'm wanting a tool steel lifter. I see them with different size edm holes from .012 to .016 to. 025 with either a center...

Comp cams has superior alien intell from outer space telling them how to make cams.

Well that sucks I was going to talk to a loan officer at my bank see if I can get a loan for the Iowa land.

I thought your ocean front property was in Nevada, with lots of casinos along the shore line.

I like the dart Shp Pro comes with 9.04 lifter bores, studed steel caps and the kit with it all in the cost, only problem it uses a bbc cam core. I don't want a solid roller cam in anything unless I was willing to pony up even more money for atleast the cost of bushed roller lifters. So now the SHP ...

Can an iron solid flat tappet cam be made for a sbc that uses the bbc journal and if so can both the 47 and 23 swap be done on it.