Port Epoxy in a street engine?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

mike_belben
Member
Member
Posts: 88
Joined: Tue Feb 15, 2005 7:56 pm
Location:

Post by mike_belben »

devcon F-2 "liquid aluminum" is the one and is available through MSC. plan on it being quite watery and running from wherever you put it for about an hour and a half.
gofaster
HotPass
HotPass
Posts: 536
Joined: Fri Apr 15, 2005 8:21 am
Location: Indiana
Contact:

Post by gofaster »

Splash Zone A-788 gets my vote. Holds up fine in air cooled Harley ports where we get some wild temperature swings. Joe Mondello sells it

http://www.mondello.com/
tjs44
HotPass
HotPass
Posts: 747
Joined: Thu Jul 07, 2005 2:30 pm
Location: long beach.ca

Post by tjs44 »

Mendoza at Flotech uses Splashzone.And it was originally used in marine repair.Saw a prop repaired underwater with it and it stayed on,was still there when it was replaced.
Post Reply