Do you guys see any improvement from polishing out the ridges the cnc machine leaves in a port? The reason I ask is I just received my brodix track 1s. And I was wondering if it is worth the time to get in there with a cartridge roll and smooth out the ridges?
Thanks
Alex
CNC Head Finish
Moderator: Team
Head finish
Alex, as far as the finish left from the cnc, personally i always give the chambers a once-over. as for the ports, not knowing how your track 1's are. i do know first hand however that the AFR's leave a pretty healthy lip/line on the short-side. i also go and work on that a little. other wise in my opinion anything you would do is just for apperance and presentation. good luck!