As promised, here is a link to a set of images and some explaination of how to model a port. This first set shows how to set-up the foundation and model the surface that goes from the peak of the port floor to the seat on a port like a gen 1 SBC intake. If this is useful and I have time (like I did today) I will go further in this model.
http://www.schmidtmotorworks.com/port_model/port_1.html
Let me know if you have any questions,
Best Regards
Jon Schmidt
How to model a port in CAD; Step 1
Moderator: Team
-
- Vendor
- Posts: 11003
- Joined: Mon Apr 11, 2005 2:30 am
- Location: CA