SB2.2 HOW MUCH POWER
Moderator: Team
SB2.2 HOW MUCH POWER
How much Horsepower and Torque have you guys seen from unlimted engine with these heads.
-
- New Member
- Posts: 12
- Joined: Mon Mar 28, 2005 11:47 pm
- Location:
I just finished building & dyno testing a custom 436 sbc for a bracket race customer. We ported a custom set of SB2.2 heads & GM manifold modified to a 4500 carb.It has a small wet sump pan setup. It made 950 hp at 7800rpm .I stop my test at 7800 rpm due to this not being a dry sump. Torque was 687ft lbs at 6500 rpm. Torque started at 600ft lbs at 5000 rpm
How big is that motor? Even if it was 450 inches that's over 1.6 lb/inch. What kind of dyno? Thats 195 ft/lb more than a very competetive 358 Cup engine.Leon Sterett wrote:Unlimited, I don't know. I know of one that is NOT unlimited and it puts out 943Hp @ somewhere around 740 ft # perhaps a little less on a dyno that was sitting outside.
Leon
Can you offer some basic specs on that engine?Jim3046 wrote:I just finished building & dyno testing a custom 436 sbc for a bracket race customer. We ported a custom set of SB2.2 heads & GM manifold modified to a 4500 carb.It has a small wet sump pan setup. It made 950 hp at 7800rpm .I stop my test at 7800 rpm due to this not being a dry sump. Torque was 687ft lbs at 6500 rpm. Torque started at 600ft lbs at 5000 rpm
900 hp small block in my dragster would make me very happy..
Curtis
Race Flow Development
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
Simultaneous 5-axis CNC Porting
http://www.raceflowdevelopment.com
SBC SB2.2 4.165 bore 4.00 stroke 6.00 rods 2inch to 2.250 headers 4inch collector . 1220 cfm custom 4500 carb. I have done a couple of these same design styles for automatic bracket cars meaning lots of torque for the size of engine .With a broad rpm band. Last ones we just completed 400inch ford yates 830 hp & 461 bbc dart heads 850 hp. The both produce quick ets for their size.