Spark Plug Modifications
Moderator: Team
-
- Member
- Posts: 158
- Joined: Sun Jan 23, 2005 3:57 am
- Location: Overland Park in the Great State of KANSAS
- Contact:
Spark Plug Modifications
I've heard of people cutting the ground electrode off at the edge of the center electrode as opposed to going across the center electrode. Any comments good or bad? I've got a 79 Z28 359ci about 10.5:1, runs mid 12s. MSD Digital 6+, MSD billet distributor, MSD HVC II coil, MSD wires, Accel plugs .035. Normally Aspirated now going to install Nitrous Express 2 stage plate soon. Would this mod help? Should I increase the gap to say .045?
Kevin A Thornton
KAT Automotive
For Speed Equipment, Nitrous Express
katman@everestkc.net
For AMSOIL products
http://www.lubedealer.com/kat
For Herbs from the Amazon
http://www.168336.amazonherb.net
KAT Automotive
For Speed Equipment, Nitrous Express
katman@everestkc.net
For AMSOIL products
http://www.lubedealer.com/kat
For Herbs from the Amazon
http://www.168336.amazonherb.net
-
- Pro
- Posts: 362
- Joined: Fri Jun 18, 2004 11:08 pm
- Location:
If your going to run nitrous, the autolite race plug would be a good choice. The ground strap is thicker and that is a plus with nitrous.
Creekside Racing Ministry
John 14:6
Ron Clevenger
CSU Gas Dominator ProCharger nonintercooled
Top Eliminator West http://www.topeliminatorwest.net
Steve Morris http://www.stevemorrisengines.com
6.49@219mph (still tunning)
John 14:6
Ron Clevenger
CSU Gas Dominator ProCharger nonintercooled
Top Eliminator West http://www.topeliminatorwest.net
Steve Morris http://www.stevemorrisengines.com
6.49@219mph (still tunning)