I was looking around on LSM's website and came across their MMC maincaps, what's the deal on these???
Any info?
AL...
MMC Maincaps?
Moderator: Team
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Re: MMC Maincaps?
Alla360 wrote:I was looking around on LSM's website and came across their MMC maincaps, what's the deal on these???
Any info?
AL...
Could you put a link with this.
Thanks Carl
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
-
- Vendor
- Posts: 11003
- Joined: Mon Apr 11, 2005 2:30 am
- Location: CA
-
- Guru
- Posts: 1261
- Joined: Wed Feb 16, 2005 6:14 pm
- Location: Upstate New York
MMC usually means "Metal Matrix Composite". Hetre's some basic info.
http://www.absoluteastronomy.com/encycl ... posite.htm
http://www.absoluteastronomy.com/encycl ... posite.htm
-
- Guru
- Posts: 1261
- Joined: Wed Feb 16, 2005 6:14 pm
- Location: Upstate New York
Probably not the same material. There are MANY MMCs that can be made.la360 wrote:So it is most likefully the same material used in the Jager rods that were banned by the NHRA for Pro Stock
Thanks
AL>..
Yes NHRA outlawed "exotic" materials for engine parts, as well as putting minimum weights on things like rods.
-
- Member
- Posts: 84
- Joined: Tue Dec 28, 2004 7:13 pm
- Location: