Page 2 of 2

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Fri Sep 17, 2010 12:21 am
by jason snyder
I think the best search site is CRAIGSLOOK.COM

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Fri Sep 17, 2010 9:54 am
by Truckracer
I use Craigslist reader pro.... lots of search options.
http://download.cnet.com/Free-CraigsLis ... 91326.html

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Sun Sep 19, 2010 5:47 pm
by T-flow
I might have some JE's at the shop.... Have to double check C/H but I think they are std. bore.

T-flow

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Tue Jul 28, 2020 2:10 am
by pdq67
I am going to tell this on myself!

I wanted a set of real Z-28 pistons so went webbing and found an old set.

Turned out that they were .030" over and so ratty that I sent them back.

They must a been hung out in the shed for like 50 years to have become that ratty!!

Now I buy new pistons because they aren't all that high priced.

pdq67

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Tue Jul 28, 2020 2:58 am
by Mark O'Neal
rocks409 wrote: Thu Sep 16, 2010 10:09 pm I searched all of USA and Canada. Noo luck. I need a set of used 350 Chevy pistons +.070
:D :D :D :D :D :D :D :D :D :D :D :D :D

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Tue Jul 28, 2020 7:22 pm
by ricks57
Hi,
Look at Johnson's Speed Warehouse on Ebay. They have lots of old stock of performance parts. Many forged 350 piston sets.
Rick

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Tue Jul 28, 2020 10:13 pm
by superpursuit
He has had 10 years to find these now. If he hasn't found them by now I think he would have given up.

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Wed Jul 29, 2020 1:47 am
by pdq67
You are right!

Another back from the dead thread by me!!

He, He!!

pdq67

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Thu Jul 30, 2020 10:50 am
by falcongeorge
F-BIRD'88 wrote: Thu Sep 16, 2010 3:49 pm You won;t find may/any "good" used pistons for sale. All the good ones are either still running in a good motor or are reused.

Only the junk is sold off. broken sets etc.

Only used up pistons are sold off. Get a paper route and buy some new KB forged or hyper, your choice. They are very reasonably priced.

Buying used pistons is like buying used race roller tappets or junk yard vortec heads.
I buy used pistons ALL THE TIME. Its not uncommon to find NOS TRW's that have never even been run, I have a set in my 327 I bought in the original box for $150. And I would take a NOS forged trw over mexican hypers any day of the week, especially at HALF the price. I also buy used forged pistons that have been run. Inspect the skirts for scuffing, look at the ring lands, and check the underside to see if its black (avoid) mic them and you are good to go. I also bought used +030 forged flat tops on re-sized shot-peened rods with ARP bolts for my 351C for $100 CDN.

Re: I need a good place to buy a set of used forged sbc pistons

Posted: Thu Jul 30, 2020 6:18 pm
by Krooser
Plenty of Facebook groups with used race parts...

Ok I got suckered in to answering a ten year old post too!

Darn PDQ is late night surfing without his bifocals!!!!