Larry's Soft Head

General engine tech -- Drag Racing to Circle Track

Moderator: Team

LotusElise
Member
Member
Posts: 99
Joined: Tue Mar 09, 2021 10:05 am
Location: BW

Re: Larry's Soft Head

Post by LotusElise »

juuhanaa wrote: Mon Sep 26, 2022 1:08 pm Did they reduce both angles or did they use lower intake and higher exhaust valve angles by angle milling the head?
They wrote a paper about that later, I have it somewhere :D. The class rule of BTCC didn't allow to weld in and at the port.

https://youtu.be/dEW_MS72Dao
DAMPFHAMMER engine:
2000 ccm, Honda K20 NA engine
4000 rpm bandwidth of at least 192 ftlb
310 hp@8200 rpm
Post Reply