chrysler 360 / 408 combos

General engine tech -- Drag Racing to Circle Track

Moderator: Team

devilbrad
Member
Member
Posts: 112
Joined: Sun Aug 07, 2005 10:21 pm
Location: pacifica, CA
Contact:

Post by devilbrad »

Thanks Ryan, I couldnt remember the specifics of the heads, so kept my mouth shut, LOL Have you seen the rocker girdle Hughes sells for the Magnum motors?
Just a sponge, soaking up info.
mgoblue9798
New Member
New Member
Posts: 21
Joined: Tue Sep 25, 2018 11:42 am
Location: metro Atlanta

Re: chrysler 360 / 408 combos

Post by mgoblue9798 »

You didn't ask this, but I would steer your buddy away from an NOS block. I'd much rather have a seasoned machined block that has already been through the heat cycles.
rustbucket79
Guru
Guru
Posts: 2151
Joined: Fri Apr 07, 2006 8:23 pm
Location:

Re: chrysler 360 / 408 combos

Post by rustbucket79 »

After 16 years this post is dead. 8-[
agertz1
Member
Member
Posts: 194
Joined: Wed Aug 14, 2019 7:43 pm
Location:

Re: chrysler 360 / 408 combos, weird exh. port

Post by agertz1 »

On aluminum head, with head bold making port weird, why not use a stud. Weld-up the problem and make a good port, with header flange to fit ?
Art. #-o
Post Reply