Erson Cams Quality Discussion

[prairiehotrodder]

Do you need a dealer in Canada ?

[pdq67]

I never met UDHarold so would somebody please post up a picture of him..

And I to this day miss him! I called him one time late and his wife answered the phone and I asked to talk to Harold and she asked who I was and I said pdq67!!

Harold got on the phone AND said, hi pdq67!

We talked for like 2 hours or so!!

He was so glad that me, ol pdq67 would call him!

Guys said that I was shilling for him but that was not right!!

Harold was one of the few guys that would flat tell you the fucking truth about cams!! And that is why every chance I got that I mentioned contacting him!!

pdq67

[ErsonCamShop]

Hey folks,just wanted to let everyone know that if there are any quality issues or concerns or questions, we're still here! Let us know! You can reach out to us in any way, PM us, email or by phone, and we'll be checking this thread regularly!
Thanks
Russ

You guy's have been great. Appreciate the service. I order a custom cam on a Monday, they say, should probably see it by next Tuesday. Sounds good I say. I have it by Thursday, of the same week, sometimes even Wednesday if I place the order early enough on Monday. That's great service. Thanks

Anything we can do to help you out, feel free to let us know. Thanks for the positive feedback, we really appreciate it! Here at the shop we're trying hard to meet all of our customers' needs.

[ErsonCamShop]

Do you need a dealer in Canada ?

That's not our department. You would have to speak with our sales department. You may want to contact Dick Boyer. If you need his contact information, PM us and I'll get it to you.

[ErsonCamShop]

Hey, just to let you guys know we're still checking this. If anybody has any quality concerns or issues, please let us know. You can always PM us.
Thanks
Russ

[prairiehotrodder]

my current cam and previous cam were Erson solid rollers. So far, so good. I like the fact that they come with the printout from the machine that checks the whole range of specs.
Brian

[CamKing]

Hey, just to let you guys know we're still checking this. If anybody has any quality concerns or issues, please let us know. You can always PM us.
Thanks
Russ

Russ,
I've just taken over SpeedTalk, and we have a few new plans you may be interested in.
We're going to start a "Vendors" page/forum, where you can promote Erson's products and services, for free. All we require is that you offer a small discount to our "HotPass" members. All members will be able to read the Vendors forum, but only the HotPass members will be able to ask questions, or comment.
If this is something that interests you, please send me an email at jrctechgroup@bellsouth.net , or PM me here.

[ErsonCamShop]

my current cam and previous cam were Erson solid rollers. So far, so good. I like the fact that they come with the printout from the machine that checks the whole range of specs.
Brian

Thanks for the positive feedback, we always enjoy hearing that. If there's anything we can do for you in the future, please don't hesitate to let us know,
Thanks
Russ

[ErsonCamShop]

Hey, just to let you guys know we're still checking this. If anybody has any quality concerns or issues, please let us know. You can always PM us.
Thanks
Russ

Russ,
I've just taken over SpeedTalk, and we have a few new plans you may be interested in.
We're going to start a "Vendors" page/forum, where you can promote Erson's products and services, for free. All we require is that you offer a small discount to our "HotPass" members. All members will be able to read the Vendors forum, but only the HotPass members will be able to ask questions, or comment.
If this is something that interests you, please send me an email at jrctechgroup@bellsouth.net , or PM me here.

Thanks for letting us know and keeping us in the loop. Whenever you've got this set up and ready, let me know. I have forwarded this information to Paula, I'm sure she'll be interested.
Thanks
Russ

[CamKing]

Thanks for letting us know and keeping us in the loop. Whenever you've got this set up and ready, let me know. I have forwarded this information to Paula, I'm sure she'll be interested.
Thanks
Russ

If she's interested, have her email me at jrctechgroup@bellsouth.net
We're signing up vendors now.

[Alaskaracer]

Is Erson Cams still coming onto the forum or no? I'm assuming no since I haven't seen any further posts for a few years now, but never hurts to ask

[blwilliams]

I have not seen them for quite a while on this sight or any other.
Call PBM/Erson and ask for John Hartman for cam questions
180087913252006
Cam shop is still grinding camshafts.
I orderd a BBC roller a couple of weeks ago.
Cores are still an issue.

[RevTheory]

I emailed them a week ago for a lobe list and asked them about cores and no response. Same with Howard's. The last time Howard's told me they had the core I needed was in late March and my buddy is still waiting to have his cam ground so I reckon no response is better than a lie

[CamKing]

All cam companies are extremely busy.
Sales are up, and there's huge supply chain issues.
I'm spending at least 8 hours a week, trying to source supplies(Cam Cores, lifters, springs, grinding wheels, lifter boxes, coolant, etc).

[blwilliams]

I spoke to John Hartman a couple of weeks ago about a bbc standard diameter and firing order he said he had cored.
John has always returned my emails.
This is the address I use.

John Hartman <jhartman@pbm-erson.com>