Weiand MOPAR vertical cross 3x2 intake.

General engine tech -- Drag Racing to Circle Track

Moderator: Team

User avatar
panic
Guru
Guru
Posts: 2295
Joined: Sat Dec 11, 2004 12:04 pm
Location: Ecbatana
Contact:

Re: Weiand MOPAR vertical cross 3x2 intake.

Post by panic »

pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Weiand MOPAR vertical cross 3x2 intake.

Post by pdq67 »

Panic,

I have looked but never found anything??

Has there EVER been any raised, "X", intake manifolds for the SBC and BBC engines??

I would have thought that a Z-28 cross ram intake could have been modified into one?? And just maybe the old 2x2 efi cross ram intake that came along later.

pdq67
F-BIRD'88
Guru
Guru
Posts: 9802
Joined: Tue Mar 27, 2007 6:56 pm
Location: Ontario, Canada

Re: Weiand MOPAR vertical cross 3x2 intake.

Post by F-BIRD'88 »

Here you go PdQ67. Here is the base manifold just waiting for a custom plenum top.
Image
User avatar
panic
Guru
Guru
Posts: 2295
Joined: Sat Dec 11, 2004 12:04 pm
Location: Ecbatana
Contact:

Re: Weiand MOPAR vertical cross 3x2 intake.

Post by panic »

4 X DCOE?
Ron E
Guru
Guru
Posts: 2085
Joined: Wed Aug 03, 2005 9:35 pm
Location: nc

Re: Weiand MOPAR vertical cross 3x2 intake.

Post by Ron E »

Panic, great write up on the Weiand super stock intake. Thanks
F-BIRD'88
Guru
Guru
Posts: 9802
Joined: Tue Mar 27, 2007 6:56 pm
Location: Ontario, Canada

Re: Weiand MOPAR vertical cross 3x2 intake.

Post by F-BIRD'88 »

If you look at the Chevy 5.7 L 350 L-31 Vortec engine the intake manifold base is essentually a squished down low profile EFI version of this.. Would also be a nightmare to convert to carbs .
Post Reply