semi-finished cam core for Cadillac 331

Post by **NormS** » Mon May 08, 2017 11:56 am

I know this is an odd request for this forum, but does anyone know of someone who may have a semi-finished flat tappet cam core for a 1953 Cadillac 331? This is for a vintage hot rod application.

mag2555 · Post by **mag2555** » Mon May 08, 2017 12:54 pm

That would seem to be a tall order Norm, but ya never know!

cknight · Post by **cknight** » Mon May 08, 2017 9:15 pm

You might want to check with Camcraft Cams in Arden, NC. Regards, Chase

Post by **NormS** » Mon May 08, 2017 9:36 pm

Thanks, Chase. I'll give them a call.

statsystems · Post by **statsystems** » Mon May 08, 2017 10:05 pm

Call Jim at Racer Brown.

410-866-7660

Best to call him AFTER 5pm eastern time.

Post by **NormS** » Tue May 09, 2017 7:11 am

Thanks, I'll give Jim a call.

pdq67 · Post by **pdq67** » Tue May 09, 2017 7:22 am

By any chance Delta out in the NW??

Or maybe Isky?

pdq67

Truckedup · Post by **Truckedup** » Tue May 09, 2017 7:37 am

Oregon Cam grinders does a lot of vintage cams...

Post by **NormS** » Tue May 09, 2017 7:45 am

Thanks, guys. If I'm unsuccessful with Camcraft and Racer Brown, I'll try these other ones you suggested.

Don Terrill’s Speed-Talk

semi-finished cam core for Cadillac 331

semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331

Re: semi-finished cam core for Cadillac 331