Valve lap on boosted high mileage 5.3?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

GARY C
HotPass
HotPass
Posts: 6302
Joined: Tue May 14, 2013 10:58 pm
Location:

Re: Valve lap on boosted high mileage 5.3?

Post by GARY C »

franklstoner wrote: Mon Jun 12, 2017 9:12 pm I just did a leak down on all 8 cylinders. They all average around 20%. According to the gauge their all good until 40% loss. Humm
Did you test at full operating temp?
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
JDR Performance
Pro
Pro
Posts: 468
Joined: Sat Mar 06, 2010 8:26 am
Location:

Re: Valve lap on boosted high mileage 5.3?

Post by JDR Performance »

BILL-C wrote: Wed Jan 15, 2020 7:27 am The LS engine platform is definately impressive. Like everything else, it does eventually wear out and need to be freshened up. Sometimes it seems like there is an informal contest in the internet backyard LS builder crowd to see who can be the biggest cheapskate and build the worst pile of worn out parts that will run. Do the job right and take some pride in your workmanship.Do a valve job and get the heads resurfaced.
Exactly! Doing it right the first time is always cheaper in the long run.
cv67
Guru
Guru
Posts: 1836
Joined: Fri Sep 05, 2008 11:39 pm
Location: Valencia Ca

Re: Valve lap on boosted high mileage 5.3?

Post by cv67 »

valve jobs/guides arent much at all. Know the YT trend is to slap junk together they never last very long..youll make more power like this anyways
Post Reply