Have a set of 6.125” H beam Eagle Honda rods for a small block Chevy on and eagle 45 lbs crank.
Question being does anyone else make bearings aside from the Clevite Cb1780H? , std size.
Honda rod Journal?
Moderator: Team
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Honda rod Journal?
I believe ACL and King both have tri-metal bearings. But in the coated race only version.
I would call king 1st as they will be less costly compared to the others.
I would call king 1st as they will be less costly compared to the others.
Real Race Cars Don't Have Doors
-
- Pro
- Posts: 287
- Joined: Wed Sep 03, 2014 2:01 am
- Location:
Re: Honda rod Journal?
Assuming you have 2.008" housing bore in your rods? Federal Mogul 8-7195CH would also work, I have used hundreds of those.88bluestar wrote: ↑Sat Apr 13, 2019 8:22 pm Have a set of 6.125” H beam Eagle Honda rods for a small block Chevy on and eagle 45 lbs crank.
Question being does anyone else make bearings aside from the Clevite Cb1780H? , std size.
Re: Honda rod Journal?
I have heard that Honda has two different rod journal sizes...
I have a set of Pankl rods with a 1.979 + or - big end. Do these fit a 1.890 rod journal?
Anyone have a part # for a std. rod bearing? Never done this Honda deal before.
I have a set of Pankl rods with a 1.979 + or - big end. Do these fit a 1.890 rod journal?
Anyone have a part # for a std. rod bearing? Never done this Honda deal before.
Honored to be a member of the Luxemburg Speedway Hall of Fame Class of 2019
-
- Pro
- Posts: 205
- Joined: Mon Feb 04, 2019 2:23 pm
- Location: california
Re: Honda rod Journal?
Check with Callie’s about their Daido brand bearings. They have a lot of Honda sizes
Re: Honda rod Journal?
Found my answer... the rods I have are for the Honda 1.850 journal. Bought a set of bearing tonight. Thanks for the help guys.
Honored to be a member of the Luxemburg Speedway Hall of Fame Class of 2019
-
- Pro
- Posts: 378
- Joined: Sun May 21, 2017 7:39 pm
- Location:
Re: Honda rod Journal?
These are what I have, Need replacing? I have standard CB1780H bearings
Crank is very clean, no noticeable wear.
Crank is very clean, no noticeable wear.
You do not have the required permissions to view the files attached to this post.
-
- Pro
- Posts: 378
- Joined: Sun May 21, 2017 7:39 pm
- Location:
Re: Honda rod Journal?
Is King XP-Series Rod Bearings CR8028XP a direct replacement for the Clevite CB178CHA?