Epoxy and Methanol
Moderator: Team
-
Dragsinger
- Expert
- Posts: 710
- Joined: Mon Aug 25, 2008 9:38 pm
- Location:
Epoxy and Methanol
What brand of Epoxy is suitable for contact with Methanol?
Larry Woodfin - Team Woodfin Racing - Owner, Woodfin Automotive
-
Abbottracingheads
- Expert
- Posts: 816
- Joined: Fri May 18, 2007 6:46 pm
- Location: Crane, Texas
- Contact:
Re: Epoxy and Methanol
X Belzona 111 This is not cheap but worth every penny .
https://www.belzona.com/en/products/1000/1111.aspx
Z-Spar Slash Zone works really good too .
https://www.go2marine.com/product/79357 ... putty.html
https://www.belzona.com/en/products/1000/1111.aspx
Z-Spar Slash Zone works really good too .
https://www.go2marine.com/product/79357 ... putty.html
Malvin
" Keep away from people who try to belittle your ambitions. Small people always do that but the really great make you
feel that you, too, can become great". By Mark Twain
" Keep away from people who try to belittle your ambitions. Small people always do that but the really great make you
feel that you, too, can become great". By Mark Twain
-
Resimacusa
- New Member
- Posts: 2
- Joined: Wed Jul 17, 2019 6:58 am
- Location:
Re: Epoxy and Methanol
Resimac offers a similar repair compound to the Belzona 1111 at a more economical cost
https://www.resimacsolutions.com/101-me ... paste.html
https://www.resimacsolutions.com/101-me ... paste.html
Re: Epoxy and Methanol
Resimac, thanks for the link. For what its worth, I coat epoxy with 2 part automotive clear-coat.
-
Resimacusa
- New Member
- Posts: 2
- Joined: Wed Jul 17, 2019 6:58 am
- Location:
Re: Epoxy and Methanol
The clear coat shouldn’t be an issue as long as it’s being completed in the allowable overcoat timeframe.