Link bar clearance
Moderator: Team
Link bar clearance
Does this look like enough clearance between the link bar and the top of lifter bore this is with the cam at full lift and closed.
You do not have the required permissions to view the files attached to this post.
Re: Link bar clearance
It cant go any further down than down. I would say that is sufficient. You can get away with .050/.060" clearance on a crank/rod to block, looks like you have at least that and the cam is moving at half the crank speed.
-
- Expert
- Posts: 710
- Joined: Mon Aug 25, 2008 9:38 pm
- Location:
Re: Link bar clearance
You are fine. That clearance will not decrease during operation.
Larry Woodfin - Team Woodfin Racing - Owner, Woodfin Automotive