Improved engine throttle responce
Moderator: Team
-
- Expert
- Posts: 776
- Joined: Mon Nov 26, 2007 11:44 pm
- Location:
Re: Improved engine throttle responce
Reminds me of those intake gaskets with screen. Did that idea work?
Re: Improved engine throttle responce
It's such a cheap part and really easy to install,, why don't you save up and try it yourself?
Then report back on your findings
Re: Improved engine throttle responce
I may, if I get a chance. But will not evaluate it based on winging the throttle.
Test for better launch and better acceleration and need to re tune the shooter if any.
The edelbrock afb carbs may benefit from something like this to improve transition from hiway cruise to WOT.
Pesky.
Maybe I'll have to get a paper route $$$
Test for better launch and better acceleration and need to re tune the shooter if any.
The edelbrock afb carbs may benefit from something like this to improve transition from hiway cruise to WOT.
Pesky.
Maybe I'll have to get a paper route $$$
Re: Improved engine throttle responce
Ok so I bit and bought a couple as I run tunnel rams with eddy's. I did notice initial throttle response was better and seemed to transition better when going to full throttle. It's a subtle improvement but did make driveability a little better. I had a stumble on shifts as well and its gone now so...whatever. If you think is bull sh#t don't buy it.
79 Cmaro, 427 sbc, Tunnel Ram Dual Quad with Eddy carbs, AFR 210 Race Ready heads, 263-272 @.50 Comp solid roller cam, 4.10's and a faceplated Tremec TKO 600.
65 Beaumont 406 tunnel ram faceplated TKO600
65 Beaumont 406 tunnel ram faceplated TKO600
Re: Improved engine throttle responce
It certainly can't make any difference unless the pumps are squirting (ie throttle moving) or slightly after.
Re: Improved engine throttle responce
You can see that it does atomize the booster shot which in my mind is better that just flushing water down the toilet.
79 Cmaro, 427 sbc, Tunnel Ram Dual Quad with Eddy carbs, AFR 210 Race Ready heads, 263-272 @.50 Comp solid roller cam, 4.10's and a faceplated Tremec TKO 600.
65 Beaumont 406 tunnel ram faceplated TKO600
65 Beaumont 406 tunnel ram faceplated TKO600
Re: Improved engine throttle responce
If you're trying to keep mice or small children out of the engine.econo racer wrote: ↑Thu Aug 29, 2019 4:52 pm Reminds me of those intake gaskets with screen. Did that idea work?
Jim