Stage #2 289 FORD heads(DONT MOVE MIKE)
Moderator: Team
-
The Iron Icon
- Member
- Posts: 146
- Joined: Sun Jun 16, 2019 11:53 am
- Location:
Re: Stage #2 289 FORD heads(DONT MOVE MIKE)
Charlie would you happen to have a picture of short turn you could put up or pm me?
Re: Stage #2 289 FORD heads(DONT MOVE MIKE)
https://www.speed-talk.com › forum
Web results
Ported Ford 289 heads with port energy discussion - Don Terrill's ...I did the work. I believe I got 244 cfm with 1.85" intake valve. Long thread but worth looking at if you are doing 289 heads.
Web results
Ported Ford 289 heads with port energy discussion - Don Terrill's ...I did the work. I believe I got 244 cfm with 1.85" intake valve. Long thread but worth looking at if you are doing 289 heads.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
Re: Stage #2 289 FORD heads(DONT MOVE MIKE)
cuttered ssr 289 with 1.85" intake valve.
You do not have the required permissions to view the files attached to this post.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST