Page 1 of 4

engine masters live feed?

Posted: Tue Oct 01, 2019 9:46 am
by BILL-C
I thought i heard that there was going to be a live feed we could watch. If so, how do we get it?

Re: engine masters live feed?

Posted: Tue Oct 01, 2019 11:25 pm
by 1989TransAm
I heard just the opposite. No live feed. #-o

Re: engine masters live feed?

Posted: Wed Oct 02, 2019 8:03 am
by Rowdy Yates
No live feed but up to date results. Hope my little buddy wins with SamTech as a student. 2 for 2 if so, Eric and the REC is the other.


https://m.facebook.com/jepistons/

Re: engine masters live feed?

Posted: Thu Oct 03, 2019 7:48 pm
by Steve.k
Congrats to Blair Patrick on. Win with Ford Fe andGeoff Mummert with 289 in second. Good job guys. https://www.hotrod.com/articles/600hp-n ... 96-hp/.Not sure what happened with Jon had a problem with chevy but came in third.

Re: engine masters live feed?

Posted: Thu Oct 03, 2019 10:59 pm
by 1989TransAm
Thanks guys for posting the updates.

Re: engine masters live feed?

Posted: Fri Oct 04, 2019 4:38 am
by midnightbluS10
So which teams had competitors from ST?

Mummert
Ted Eaton
Barry @ Survival
Kaase
Who else and what teams were they on?


Thanks.

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 10:31 am
by Walter R. Malik
midnightbluS10 wrote: Fri Oct 04, 2019 4:38 am So which teams had competitors from ST?

Mummert
Ted Eaton
Barry @ Survival
Kaase
Who else and what teams were they on?


Thanks.
Other Entries:
Adney Brown = "perfcrank"
Chris Pelczar = "czar racing"
Jesse Robinson = "RAMM"

Team members were many from here.

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 10:56 am
by Joe-71
Joe Craine, Joe-71 303 Y Block finished #6. Joe-JDC

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 11:39 am
by PackardV8
Can someone post the link to the Early Iron results? For whatever reason, I can't find them.

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 1:24 pm
by wwmtlineman

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 6:41 pm
by Walter R. Malik
PackardV8 wrote: Sun Oct 06, 2019 11:39 am Can someone post the link to the Early Iron results? For whatever reason, I can't find them.
This is what I copied from the scoreboard when I was there:

1. Blair Patrick ... FE Ford ...2511
2. Geoff Mummert ... S.B. Ford ... 2504
3. Jon Kaase ... B.B. Chevy ... 2448
4. Clark Hinkle ... B.B. Chevy ... 2411
5. Adney Brown ... S.B. Chevy ... 2405
6. Ted Eaton ... Y Block Ford ... 2358
7. Chris Pelczar ... S.B. Chevy ... 2321
8. Barry Robotnick ... FE Ford ... 2285
9. Daniel Boshears ... B.B. Ford 385 ... 2282
10. Jamie Wells ... S.B. Chevy ... 2254
11. David Molnar ... Studebaker ... 2182
12. Robert Peters ... S.B. Chevy ... 2065
13. Michael Semchee ... Pontiac ... 2061

3 Engines Did Not Compete

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 6:46 pm
by PRH
3 Engines Did Not Compete
No show’s, or had problems there that prevented them from competing and/or completing their runs?

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 7:23 pm
by Walter R. Malik
PRH wrote: Sun Oct 06, 2019 6:46 pm
3 Engines Did Not Compete
No show’s, or had problems there that prevented them from competing and/or completing their runs?
I think they were "no shows" but, I am not sure. They were never put on the dyno.

Re: engine masters live feed?

Posted: Sun Oct 06, 2019 7:41 pm
by bob460
What was the issue with Kaase's engine?

Re: engine masters live feed?

Posted: Mon Oct 07, 2019 10:02 am
by NormS
The basic issue there, is that he didn't make quite enough power to win.