SBC Intake

[vht]

What would be a good single 4 intake, street and strip, for a 406, 600 hyd roller, foot brake, something that would pull to 6800. I figure a 750 Holley DP, maybe a 850 Q series haven't decided yet. Still in the planning stages, for the heads, I was considering Brodix, Dragon Slayer.

[Mikej26]

My vote is the Holley Dorton 300-110

[levisnteeshirt]

870 street avenger does well with some help

[F-BIRD'88]

The tall Holley strip Dominator.
A hyd roller will leave you wanting re: 6800 rpm
A street roller has all the dependability without the disappointment..
A 750 hp will get er done. A 850 will make a bit more top end. Pass on the street avenger stuff.

[levisnteeshirt]

The tall Holley strip Dominator.
A hyd roller will leave you wanting re: 6800 rpm
A street roller has all the dependability without the disappointment..
A 750 hp will get er done. A 850 will make a bit more top end. Pass on the street avenger stuff.

Foot braking , a VS carb can be a benefit unless he has a 5000+ stall ,, nothing wrong with the 870 street avenger ,, it's basically a VS 850 ,, I change them to 4 corner , put the IFR on top , that would really help a foot brake car despite what ya see on here ,, it really helps the response ,, there is life past dynos and wide band gauges