Don Terrill’s Speed-Talk

Anyone have any real data on the Brodix IK 200 heads? Wondering how they would work on a pump gas 406. Was thinking of using a Comp 12-460-8 hyd roller. 600 lift, 244 duration at .050. Lobe separation 110. I always ran Brodix on my BBC in the race car, not much experience with SB stuff.

Brodix flow numbers have alway been right on the money when tested on my bench , and judging by those numbers those heads in out of the box form should make a solid 525 hp and with a 406 cid motor pull real strong to 6500.

These are good heads for the money.

I built a 355 SBC for a buddy with these heads ported with a similar cam , 10:1 CR and a tunnel ram.

His 69' full trim Chevelle ran 7.4s in the eight mile with a good light under the front wheels.

I've had good luck with all the BBC Brodix heads. I was just shocked at the price, pretty cheap I thought.