Hi all, I am building up a distributor and want to know what to replace the factory fitted sawdust packing which is above the top bushing I have seen others pack this cavity with grease but I feel something else might be more suitable. i dont really want to reuse the sawdust if possible.
Any advice welcome.
Pre 1974 Delco distributor and the sawdust packing
Moderator: Team
-
- Pro
- Posts: 493
- Joined: Sat Oct 04, 2014 4:23 am
- Location: south africa johannesburg
Re: Pre 1974 Delco distributor and the sawdust packing
Can make a seal using felt. And oil it.
My chevy inline distributors use them.
And i have one thats been rebuild and has a rubber lip seal, so far no issues.
Chevyfreak.
My chevy inline distributors use them.
And i have one thats been rebuild and has a rubber lip seal, so far no issues.
Chevyfreak.
Bowtie for life
Re: Pre 1974 Delco distributor and the sawdust packing
I packed it with felt and impregnated it with as much straight 30w oil as it would swallow. No problems.
Re: Pre 1974 Delco distributor and the sawdust packing
Thanks for the replies, felt is looking like the winner
Re: Pre 1974 Delco distributor and the sawdust packing
Put motor oil in the cavities and pack it with paper towel so the paper is saturated with motor oil.