Page 1 of 1
Roller lifters rebuild
Posted: Mon Nov 04, 2019 1:22 pm
by fishman
I have a set of comp roller lifters that are getting old and would like to get them inspected or rebuild, I know comp use to rebuild them but stop doing it. What do you guys recommend
Thanks
Re: Roller lifters rebuild
Posted: Mon Nov 04, 2019 3:22 pm
by F-BIRD'88
Find a supplier for the parts and do it yourself.
Re: Roller lifters rebuild
Posted: Mon Nov 04, 2019 4:16 pm
by ProPower engines
For the cost of doing that it may be better to just replace them as a set.
Are they solid or Hyd. rollers?
Do they have needle bearing wheels or bushing wheels?
What is the body and wheel diameter?
Re: Roller lifters rebuild
Posted: Mon Nov 04, 2019 5:15 pm
by DCal
Call Shaver Specialties in California, they build the current Comp premium lifters. Sorry I don't have the phone #
Re: Roller lifters rebuild
Posted: Mon Nov 04, 2019 7:24 pm
by tjs44
I think Shaver just does their hyd rollers?Tom
Re: Roller lifters rebuild
Posted: Mon Nov 04, 2019 10:14 pm
by fishman
The website says shaver only does hyradulic lifters. Mine are solid not sure if they are needled or bushings. I sent them to comp to rebuild a few years ago but they don’t rebuild them anymore. I have about 150 passes since rebuild