I've learned the heads will be the 63cc Edelbrocks.
I have an old KwikWay valve seat grinder and some long and normal grinding bits and rolls to blend and polish ports with, but no flowbench.
We have some shops overhere that are quite at home doing machinework on American heads.
But specific knowledge about porting is more limited.
And cost of labour quickly outweighs costs to just buy 'new'.
Dodge StreetVan w/360ci Alu.heads - ProFlo4 - Camchoice
Moderator: Team
- BigBlockMopar
- Momentary Specialist
- Posts: 336
- Joined: Fri Mar 25, 2016 8:53 pm
- Location: Netherlands
- Contact: