Adjustable guide plates

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
travis
Guru
Guru
Posts: 1621
Joined: Sun Mar 15, 2009 5:31 am
Location:

Adjustable guide plates

Post by travis »

Do these need to be welded once they are set correctly?
Top
tenxal
Expert
Expert
Posts: 804
Joined: Sun Nov 17, 2013 8:48 pm
Location:

Re: Adjustable guide plates

Post by tenxal »

On SBC's, Isky and JoMar have given no problems without welding.

Hope this helps.
Top
User avatar
BOOT
Guru
Guru
Posts: 2906
Joined: Fri Apr 09, 2010 6:23 pm
Location: Michigan

Re: Adjustable guide plates

Post by BOOT »

Same no problem with either brand on sbc, I like the jomar 3 piece but not been able to find them in stock.
Channel About My diy Projects & Reviews https://www.youtube.com/c/BOOTdiy

I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!
Top
User avatar
needforspeed66gt
Guru
Guru
Posts: 2069
Joined: Sat May 06, 2006 6:18 pm
Location: California

Re: Adjustable guide plates

Post by needforspeed66gt »

I weld and number them so at refresh time they can be removed for proper cleaning and then they'll go back in with the spacing exactly as you first set them.
Nate @steeldustmachine
Engine Machinist
Top
travis
Guru
Guru
Posts: 1621
Joined: Sun Mar 15, 2009 5:31 am
Location:

Re: Adjustable guide plates

Post by travis »

2B7903EA-5068-4CAF-ABFA-9D31F8D17DA5.jpeg

These are the supplied guide plates that came with my SBF Promaxx heads. I have no idea who made them as they are completely unmarked
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “Engine Tech”