---I have this head porting project but have no idea what the head fits and what it's designation is yet.
---if anybody knows anything about what this fits and possibly any flow numbers I'd appreciate some story about it.
---also would like to hear something about this head being used maybe in a stock versus modified condition.
---the sparkplugs are all tilted in two different directions---4 lean one direction and two lean the other direction.
---the end pair of cylinders are opposite to each other---and the two middle cylinders are opposite to each other
---I don't have any valves for it yet.
--valve guides look to be 8mm---about .314/.315" or so
thanks,,,,
looking for info about this inline hemi 6 cylinder head
Moderator: Team
-
- Guru
- Posts: 2651
- Joined: Sun Sep 05, 2004 6:38 pm
- Location: salt lake city, ut
- Contact:
looking for info about this inline hemi 6 cylinder head
You do not have the required permissions to view the files attached to this post.
Re: looking for info about this inline hemi 6 cylinder head
Looks like a Toyota 5M-GE cylinder head.
The combustion chambers and ports looked very "Toyota" to me, like an extended 22R, but I got thrown off a little bit by the lack of cam boxes. Also, I thought all the DOHC M engines were 4 valves per cylinder. Oops!
The combustion chambers and ports looked very "Toyota" to me, like an extended 22R, but I got thrown off a little bit by the lack of cam boxes. Also, I thought all the DOHC M engines were 4 valves per cylinder. Oops!
- midnightbluS10
- Expert
- Posts: 933
- Joined: Sun Oct 20, 2013 8:41 am
- Location: Shreveport, LA
Re: looking for info about this inline hemi 6 cylinder head
5MGE came with 161 hp and 169 tq in its final iteration. Could be found in '82-'86 Toyota Supras in the US.
JC -
bigjoe1 wrote:By the way, I had a long talk with Harold(Brookshire) last year at the PRI show. We met at the airport and he told me everything he knew about everything.It was a nice visit. JOE SHERMAN RACING
Re: looking for info about this inline hemi 6 cylinder head
Stan's site shows intake flow at 10mm of 178 and 252cfm, stock vs ported.
One of my customers years and years ago had one of these in a Cressida (stock). At the time I remember how well it ran. Considering the stock GM crap I worked on at the time, not a surprise.
3.27" bore x 3.35" stroke.
One of my customers years and years ago had one of these in a Cressida (stock). At the time I remember how well it ran. Considering the stock GM crap I worked on at the time, not a surprise.
3.27" bore x 3.35" stroke.
-
- Guru
- Posts: 2651
- Joined: Sun Sep 05, 2004 6:38 pm
- Location: salt lake city, ut
- Contact:
Re: looking for info about this inline hemi 6 cylinder head
--OK--that was what I needed--thank all you guys.