chevy 350 .010 over pistons
Moderator: Team
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location:
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location:
Re: chevy 350 .010 over pistons
im seeing that JE makes .005 and .010" over FORGED offerings.
having trouble locating hypers however. I'm almost positive I have seen them in the past however.
having trouble locating hypers however. I'm almost positive I have seen them in the past however.
-
- Guru
- Posts: 1649
- Joined: Tue Mar 06, 2007 7:23 pm
- Location: San Tan Valley, AZ
- Contact:
Re: chevy 350 .010 over pistons
Those are probably make to order.
Autotec can usually knock them out in a few days, this time of year.
Other than that, I'd have to know more to come up with a real answer.
Autotec can usually knock them out in a few days, this time of year.
Other than that, I'd have to know more to come up with a real answer.
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location:
Re: chevy 350 .010 over pistons
Mark O'Neal wrote: ↑Thu Nov 21, 2019 4:02 am Those are probably make to order.
Autotec can usually knock them out in a few days, this time of year.
Other than that, I'd have to know more to come up with a real answer.
Mark, you wouldn't happen to have contact information for autotec would ya? where are they located?
-
- Guru
- Posts: 1264
- Joined: Fri Feb 26, 2010 11:15 am
- Location: Gold Canyon, AZ
Re: chevy 350 .010 over pistons
I'm not Mark, but . . . . . .
RaceTec Pistons
Jeremy Gillum, vice president
15681 Computer Lane
Huntington Beach, CA 92649
phone: 714.903.4362
jeremy@racetecpistons.com
www.racetecpistons.com
RaceTec (Auto/Tec) is located in the building that was home to JE Pistons for several years, when Wayne Brooks and Barry Calvert owned the business.
RaceTec Pistons
Jeremy Gillum, vice president
15681 Computer Lane
Huntington Beach, CA 92649
phone: 714.903.4362
jeremy@racetecpistons.com
www.racetecpistons.com
RaceTec (Auto/Tec) is located in the building that was home to JE Pistons for several years, when Wayne Brooks and Barry Calvert owned the business.
Bill
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist